Advertisement
Quick Links
Pentium 4 2.8/2.4GHz, Celeron 2.0GHz CPU
PCP4-28, PCP4-24, PCP4C-20
Thank you for purchasing the product. The product is a combination of a CPU and a heat sink fan.
Follow the procedure in this manual to install the CPU and heat sink fan.
WARNING
Before starting installation, be sure to turn off the power to prevent electric shocks and burns.
Product configuration
- CPU...1
- Heat Sink fan...1
- User's Guide (this booklet) ...1
Target Model
-
SPI-8450-LLVA
-
SPI-8451-LLVA
-
SPI-8451-LVA
Specification
Item
Model
C
P
External Bus Speed
U
Built-in L2 Cash
Core voltage
Package
Fan speed
F
Life time
A
Speed sensor
N
Safety features
Rated current
Operating temperature
Storage temperature
Operating/ Storage humidity
range
Heat-Sink FAN dimensions
(mm)
Heat-Sink FAN weight
1
with HeatSink-FAN
User's Guide
CONTEC CO.,LTD.
PCP4-28
Intel(R) Pentium(R) 4
Processor 2.8GHz
533MHz
512KB
1.525V
FCPGA2 478Pin
5400rpm (Typ.) / 4860rpm (Min.)
40,000 hours
Built in
Reverse-connection protection, Stuck-burn prevention
0.48A (Typ.) / 0.52A (Max.)
0 - 50°C
-30 - 75°C
20 - 85%RH (No condensation)
90(D) x 95(W) x 62(H)
About 450g
PCP4-24
Intel(R) Pentium(R) 4
Processor 2.4GHz
PCP4-28, PCP4-24, PCP4C-20
PCP4C-20
Intel(R) Celeron(R) Processor
2.0GHz
400MHz
128KB
Advertisement
Related Manuals for Contec PCP4-28
Summary of Contents for Contec PCP4-28
- Page 1 Pentium 4 2.8/2.4GHz, Celeron 2.0GHz CPU with HeatSink-FAN PCP4-28, PCP4-24, PCP4C-20 User’s Guide CONTEC CO.,LTD. Thank you for purchasing the product. The product is a combination of a CPU and a heat sink fan. Follow the procedure in this manual to install the CPU and heat sink fan.
- Page 2 PCP4-28, PCP4-24, PCP4C-20 Instruction Manual How to attach (1) Unlock the CPU socket following one of the procedures described below, depending on its type: Lever type : Screw type : Pull up the lever. Turn the screw and align it to the release position.
- Page 3 PCP4-28, PCP4-24, PCP4C-20 Instruction Manual (4) Press the four corners of the heat sink fan from above to hook the four ends of the heat sink fan clips into the retention frame on the CPU board. (5) Push the right and left levers on the heat sink fan slowly down at the same time to fasten the heat sink fan.
-
Page 4: How To Obtain Service
CONTEC Interface boards are warranted by CONTEC to be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser. Replacement or repair will be free of charge only when this device is returned to CONTEC freight prepaid with the original invoice.