Connecting The Power Cord; Connecting A Vcr Or Cable Satellite Box - Philips LX3700D Owner's Manual

Step 6: Connecting the power
cord
After everything is connected properly, plug in the
AC power cord to the power outlet.
Never make or change any connections with the power
switched on.
VIDEO OUT
A/V SCART OUT
S-VIDEO
S-VIDEO
IN
AUDIO ~ AC MAINS
OUT SCART IN
VIDEO IN
1
4
IMPORTANT!
The type plate is located at the bottom of the
system.
This product complies with the radio interference
requirements of the European Community.
The apparatus shall not be expose to dripping or
splashing and that no objects filled with liquid such
as vase shall be placed on the apparatus.
To avoid overheating of the system, a safety circuit
has been built in. Therefore, your system may
switch to Standby mode automatically under
extreme conditions. If this happens, let the
system cool down before reusing it.
VIDEO
AC MAINS~
2
Step 7: Connecting a VCR or
Cable /Satellite Box
Rear of TV
(example only)
SCART IN
1
OUT IN
ANT IN
Cable/Satellite
TO TV
AUDIO IN AUDIO OUT DIGITAL FR C
WOOFER
IN
LINE OUT
MW
OUT
AUX OPTICAL COAXIAL
2 4
Viewing and listening to the playback
1 Connect the VCR or Cable/Satellite Box to the TV as
shown.
2 Connect the DVD system's AUDIO IN-AUX jacks to the
AUDIO OUT jacks on the VCR or cable / satellite box.
Before starting operation, press AUX/DI on the remote to
select "AUX-ANA" in order to activate the input source.
Recording DVDs
Some DVDs are copy-protected. You cannot record or
dub protected discs using a VCR.
3 Connect the DVD system's VIDEO jack to the VIDEO IN
jack on the VCR.
4 Connect the DVD system's AUDIO OUT jacks to the
AUDIO IN jacks on the VCR. This will allow you to make
analogue stereo (two channel, right and left) recordings.
To view DVD playback while recording. You must connect
the DVD system to your TV using the SCART or the S-
VIDEO connection.
Connections
S-VIDEO
AUDIO IN
OUT SCART IN
VIDEO IN
VCR or
Box
FL SR SL SW
VIDEO OUT
A/V SCART OUT
S-VIDEO VIDEO
(8 )
SPEAKERS
3
C
ONNECTIONS
2
11