Acer Extensa Series User Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. Extensa Series
  6. User manual
Acer Extensa Series User Manual

Acer Extensa Series User Manual

Acer extensa series notebook user's guide
Hide thumbs Also See for Extensa Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Extensa
i

Advertisement

Table of Contents
loading

Related Manuals for Acer Extensa Series

Summary of Contents for Acer Extensa Series

  • Page 1 Extensa...
  • Page 2 Copyright © 1996 Texas Instruments All Rights Reserved — Printed in Taiwan Extensa Series Notebook User’s Guide TI Part No. 9811352-0001 Original Issue: January 1996 Changes may be made periodically to the information in this publication. Such changes will be incorporated in new editions of this manual.

  • Page 3: Fcc Notice

    This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio...
  • Page 4 Use Conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 5: Table Of Contents

    Preface Chapter 1 Before You Begin Creating Backup Diskettes... 1-2 Features of the Computer ... 1-3 Environmental Specifications ... 1-5 Using the Computer ... 1-6 Suspend-to-Disk Mode ... 1-8 Securing the Computer ... 1-10 Using the AC Adapter ... 1-11 Chapter 2 Using Your Computer Starting the Computer ...
  • Page 6 Contents Chapter 4 Options AC Adapter... 4-2 PCMCIA ... 4-3 Numeric Keypad ... 4-5 External Monitor ... 4-6 Using an External Mouse ... 4-7 Using and External Keyboard... 4-8 Memory... 4-9 Audio Options ... 4-10 Miscellaneous Options... 4-11 Chapter 5 Using Software Using Supplied Software ...

  • Page 7: Preface

    Preface This manual describes features of the Texas Instruments Extensa notebook computers. The Extensa series computers are similar in appearance and incorporate such features as PCMCIA and internal pointing device. The following figure displays the Extensa computer. Extensa This manual should answer most of the questions you have about the day-to-day operation of your Extensa notebook computer.
  • Page 8 Preface You should also take advantage of the online help files that are available with almost all of the programs shipped with your computer. We hope you enjoy your Extensa computer. With proper care, your computer will provide you with years of productive service. viii...
  • Page 9 Before You Begin After completing procedures in the Quick Start instructions, read this chapter to learn about important functions of your computer. Some, such as Creating Backup Diskettes , should be performed as soon as possible after the purchase of your computer. Contents Creating Backup Diskettes...

  • Page 10: Creating Backup Diskettes

    Creating Backup Diskettes You should create your backup system diskettes as soon as possible after purchasing your notebook. This process requires approximately thirty 3 1/2-inch, 1.44 MB diskettes. Labels for the diskettes are included with the manual. To create backup system diskettes, use the Create System Disk tool that is part of Windows...

  • Page 11: Features Of The Computer

    Features of the Computer Standard Features The following table displays Extensa standard features: 8 MB EDO memory 1 MB of video memory Fast video graphics accelerator Suspend-to-disk (zero-volt suspend) function No-reboot setup function (accessed through Setup button only) Dualscan color displays Simultaneous display with external CRT 16-bit stereo audio One type III or two type II/I PCMCIA slots...

  • Page 12: Customizing Features

    Features of the Computer Customizing Features The following features allow you to customize your computer to fit your requirements. External keyboard port* External PS/2 mouse port* External numeric keypad port* 4 MB, 8 MB and 16 MB EDO type small outline dual inline memory module (soDIMM) upgrades * Only one of the keyboard, PS/2 mouse, or...

  • Page 13: Environmental Specifications

    Environmental Specifications This section provides information on the optimum operating environment for your Extensa notebook computer. Temperature Operating: Storage: Relative Humidity (Noncondensing) Operating: Storage: Shock Operating: Storage: Vibration Operating: Storage: 50° to 95°F (10° to 35°C) -4° to 140°F (-20° to +60°C) 20% to 80% 20% to 80% Maximum 5g pulse in X,...

  • Page 14: Using The Computer

    Using the Computer Never pick up or carry your unit by the display. Never use the computer in harsh environments where it could be subjected to rapid temperature changes and excessive dust. Never expose the computer to excessive vibration. Never expose the hard disk or floppies to strong magnetic fields, such as those generated by audio system speakers or telephone handsets.
  • Page 15 Using the Computer Do not try to force the cover beyond its fully opened position — about 180 degrees. Caution: In the rare event that you should see or smell anything that indicates overheating (smoke or a strange smell): 1. Turn off the power. 2.

  • Page 16: Suspend-To-Disk Mode

    Suspend-to-Disk Mode Suspend-to-disk mode (also called zero-volt suspend mode) saves battery power when you are not actively using your computer. In suspend-to-disk mode, the computer saves the current system state onto your hard disk and then shuts off. Press the Suspend to Disk button to enter suspend-to-disk mode.

  • Page 17: Securing The Computer

    Securing the Computer Your Extensa computer comes with a safety notch. To physically secure your computer, complete the following steps: 1. Wrap the cable of a portable computer Kensington security lock (not provided) around a table, desk drawer handle or any immovable object.

  • Page 18: Using The Ac Adapter

    Using the AC Adapter Connector Charges the internal battery pack and Adapter operates the computer on AC power whether or not a battery pack is installed. The AC adapter can be operated anywhere where the outlet supplies between 100- 240 volts AC. The AC adapter has a detachable AC power cord.
  • Page 19 Using the AC Adapter To connect the AC adapter, complete the following steps: 1. Turn off the power, or press the Suspend to Disk button to put the computer into suspend-to-disk mode. 2. Connect the female connector of the AC cord to the inlet on the AC adapter.

  • Page 20: Chapter 2 Using Your Computer

    Using Your Computer Before beginning this chapter, ensure you have read and understood Chapter 1. Chapter 2 describes how to start and use your Extensa computer. Contents Starting the Computer ... 2-2 Using the Brightness Control ... 2-3 Using the Contrast Control ... 2-4 Using the Volume Control ...

  • Page 21: Starting The Computer

    Starting the Computer Power Switch Power Switch Power Switch Turns the computer on and off for both AC and battery operation. When the power is off, the battery continues to charge (if a powered AC adapter is connected to the notebook); however, all computer functions cease.

  • Page 22: Using The Brightness Control

    Using the Brightness Control Brightness Control Brightness Adjusts the brightness level of the Control screen. Press Fn+F2 to display the brightness control pop-up. Press Fn+ to increase and decrease the brightness of the display respectively. The brighter the screen, the more power is used during battery operation.

  • Page 23: Using The Contrast Control

    Using the Contrast Control Contrast Control (Dual-Scan Only) Contrast Control Adjusts the contrast level of the illuminated screen. Press Fn+F2 to toggle between the contrast control and brightness control pop-up. Then press Fn+ to increase and decrease the contrast of the display respectively.

  • Page 24: Using The Volume Control

    Using the Volume Control Volume Control Volume Adjusts the volume. Control Press Fn+F5 to display the volume control pop-up. Press Fn+ to increase and decrease the volume respectively. Press Fn+Esc to exit the pop-up control...

  • Page 25: Ejecting Pcmcia Cards

    Ejecting PCMCIA Cards The PCMCIA eject buttons are found beside each slot. Pressing an eject button ejects the PCMCIA card from the slot. PCMCIA Eject Buttons Ejecting a PCMCIA Card from Windows 95 Follow these steps to eject a PCMCIA card while using Windows 95.

  • Page 26: Using Indicator Lights

    Using Indicator Lights The computer uses the following indicator lights to show the status of certain functions. Battery Charging Indicator Power Indicator Top Indicator Lights Power Lights green when power is supplied Indicator to the notebook computer. Flashes when the battery power is low.
  • Page 27 Using Indicator Lights Num Lock Indicator Hard Disk Indicator Standby Mode Indicator Hard Disk Indicator Num Lock Indicator Caps Lock Indicator Scroll Lock Indicator Scroll Lock Indicator Caps Lock Indicator Standby Mode Indicator Front Indicator Lights Lights when the computer enters standby mode.

  • Page 28: Using The Touchpad

    Using the Touchpad The embedded touchpad offers a unique and efficient way of pointing and selecting in a Windows environment. The following figure shows the touchpad. Touchpad Left Button Right Button Touchpad The touchpad responds to finger movements on its surface. To move the cursor, move your finger on the touchpad surface.

  • Page 29: Configuring The Touchpad

    Using the Touchpad Configuring the Touchpad You can get better control of the touchpad by installing the Synaptics Touchpad utility. To install the utility, follow the instructions that came with your system. Once this utility has been installed, you can configure the touchpad using the Touchpad utility in Windows 95.
  • Page 30 Using the Touchpad 3. Double-click on the Touchpad icon and select General. 4. Select the Options... button to display the Synaptics Touchpad Control Panel dialog box. 2-11...
  • Page 31 Using the Touchpad You can configure different aspects of the touchpad including the pointer, motion and orientation as well as touchpad shortcuts. See the online help for details. 2-12...

  • Page 32: Using Disk Drives

    The Extensa notebook comes with a Hard Disk 540-million byte (524 MB) or higher capacity hard disk drive. The hard disk is formatted and loaded with software during manufacture. Do not format the hard disk. The floppy drive can read from and Floppy Drive write to formatted 3.5-inch, double- sided, high-density (2HD), 1.44 MB...

  • Page 33: Floppy Drive Guidelines

    Using Disk Drives Floppy Drive Guidelines Failure to observe the following precautions can damage both the floppy drive and the data on the floppy: Insert the floppy into the floppy drive slot label side up and the metal-shutter end first. Gently push the floppy into the floppy drive slot until the floppy clicks into place.

  • Page 34: Adding Memory

    Your computer is equipped with 8 MB of random access memory (RAM). Memory expansion can be accomplished by upgrading from 8 MB of memory up to 40 MB of memory. Refer to Chapter 4, Options, or to the installation instructions that come with optional memory for further information.

  • Page 35: Using The Keyboard

    Using the Keyboard The computer has many special keys, but most of them depend on an application for their functionality. Special Keys The following keys have special functions at the command level of MS-DOS and within many programs. Fn-Pause Shift-Prt Sc Fn-Break Ctrl-Fn-Pause Ctrl-Fn-Break...

  • Page 36: Windows 95 Keys

    Using the Keyboard Loads the ROM-based Setup from the (during POST) DOS prompt (not in Windows 95) when pressed during POST (power on self test) at system startup. Ctrl-Alt-Del Terminates all programs, reloads MS-DOS file; also called “warm start” or “warm boot”...
  • Page 37 Using the Keyboard Windows logo key + M Windows logo key + R Application key Please refer to your Windows 95 manual for more information on these Windows 95-specific keys and their functions. 2-18 Minimize All Display Run dialog box Displays the application’s context menu (same as a right-click)

  • Page 38: Using The Internal Numeric Keypad

    Using the Internal Numeric Keypad The keyboard has an embedded keypad that provides the same functions as the discrete numeric keypad on an AT™ enhanced keyboard. The embedded numeric keypad keys shown in the following figure generate AT-keypad characters and functions when pressed in conjunction with Num Lock , Fn and Shift .

  • Page 39: Num Lock Off

    Using the Internal Numeric Keypad Pressing Shift with a key generates the characters shown in the following figure. Num Lock On (with Shift) If you press and hold Fn in this mode, the keypad generates their normal characters. Num Lock Off When the Num Lock indicator is off, the keyboard acts as normal.

  • Page 40: Using Connectors And Ports

    Using Connectors and Ports This section provides a description of connectors and ports on the rear and left side panel of the Extensa notebook computer. DC-in PS/2 DC In Connects the AC adapter output connector to this jack to recharge the battery and supply ac power to the computer.
  • Page 41 Using Connectors and Ports External Monitor (15-pin) Serial (9-pin) Parallel (25-pin) Line-in Microphone- Line-out PCMCIA 2-22 Connects to an external analog VGA monitor. Connects to external devices such as a serial printer. 16550 UART compatible. Connects to a parallel printer or other device that uses a standard parallel interface.

  • Page 42: Chapter 3 Using Battery Power

    Using Battery Power The primary difference between using battery power and AC power is the limited time you can operate before you must recharge. This chapter covers charging the battery and maximizing the time between charges and assumes that you installed and charged the battery as directed in the Quick Start instructions.

  • Page 43: Guidelines For Battery Use

    Guidelines for Battery Use Caution: Never dispose of exhausted batteries in a fire. Recycle if possible. The battery should be handled carefully to ensure maximum life. In particular: Do not drop the battery or subject it to shocks. Do not expose the battery to direct sunlight, moisture, chemicals, or temperature extremes.

  • Page 44: Switching To Battery Power

    Switching to Battery Power This procedure should only be done if your battery currently has charge remaining. The Duracell NiMH battery pack is “hot-pluggable”. To use battery power, install batteries as described in Installing the Battery Pack later in this section. Your computer will automatically switch to AC power whenever an AC adapter is plugged into the notebook.

  • Page 45: Responding To Low Battery Conditions

    Responding to Low Battery Conditions The notebook has battery-low warning signals that are both audible and visible. When the battery has 5% to 10% of its charge remaining, the power indicator light found to the left of the power switch flashes at regular intervals until the battery power is depleted.
  • Page 46 Low Battery Conditions Turn off the computer if it does not need to be active. Once your system enters suspend-to-disk mode, you can replace with a fully-charged battery and then resume from suspend to disk mode or connect AC power. Responding to...

  • Page 47: Recharging The Battery

    Recharging the Battery Caution: Never recharge the battery differently from the procedure described in this manual. The following procedure is acceptable under most circumstances: 1. Install the battery pack in your computer (if not already installed). 2. Connect the AC adapter as described in Chapter 1.

  • Page 48: Conditioning The Battery

    Conditioning the Battery The Duracell battery is a Nickel-Metal-Hydride (NiMH) rechargeable battery. NiMH batteries require occasional conditioning to maintain a full battery charge. An unconditioned NiMH battery may hold less than half of full charge. You should condition the battery when you first use your computer and after every three to five shallow discharges, that is, after you use only a small portion of the battery charge before...

  • Page 49: Removing And Installing The Battery Pack

    Removing and Installing the Battery Pack Removing the Battery Pack Follow these steps to remove the battery: Caution: Turn off the notebook or enter suspend mode before removing a battery pack. 1. Remove the battery compartment cover. 2. Release the battery by pulling on the loop attached to the battery.

  • Page 50: Installing The Battery Pack

    Removing and Installing Installing the Battery Pack Follow these steps to install the battery: Caution: Turn off the notebook or enter suspend mode before installing a battery pack. 1. Remove the battery compartment cover. 2. Insert the battery pack (connector side up) into the compartment, and push the battery completely into the compartment until you feel the contacts engage.

  • Page 51: Conserving Battery Power

    Conserving Battery Power The following tips can help you prolong the life of a battery charge: Keep the display at the lowest comfortable brightness and contrast level. Reducing brightness and contrast even a small amount can significantly reduce power consumption and increase operating time. Enter Setup using the Setup button to access the Power Management screen and enable the power saving parameters.
  • Page 52 This chapter provides information on Options available for your Extensa computer. For further information, refer to the installation instructions that come with the specific option. Contents AC Adapter...4-2 PCMCIA...4-3 PCMCIA Option Cards ...4-3 Ejecting a PCMCIA Card from Windows 95 ...4-4 Numeric Keypad ...4-5 External Monitor...4-6 Using an External Mouse ...4-7...

  • Page 53: Ac Adapter

    AC Adapter The AC adapter charges the internal battery pack and operates the computer on AC power whether or not a battery pack is installed. The AC adapter can be operated anywhere between 100 - 240 volts AC and has a detachable AC power cord. Caution: Use only the AC adapter recommended in this document (TI Part No.

  • Page 54: Pcmcia

    PCMCIA Option Cards PCMCIA option cards are used to add additional functionality to your computer, such as communicating over a telephone or connecting to a network. The Extensa has built-in slots that support one Type III or two Type II/I PCMCIA option cards.
  • Page 55 PCMCIA Open the Control Panel. Click on the PCMCIA icon. Select the card you want to eject. Click on Stop. After receiving a Windows 95 prompt “You may safely remove this device.”, press the eject button to eject the PCMCIA card. PCMCIA Eject Buttons Ejecting a PCMCIA Card...

  • Page 56: Numeric Keypad

    Numeric Keypad The optional PS/2 Numeric Keypad (TI Part No. 2581381-0001) can be used instead of the internal numeric keypad. PS/2 Numeric Keypad To use the PS/2 numeric keypad, turn the notebook off. Plug the keypad’s cable connector into the computer’s PS/2 (Mouse/Keyboard) connector located on the rear of the computer (See Using Connectors and Ports in Chapter 2).

  • Page 57: External Monitor

    External Monitor You can connect the computer to external monitors, many of which can display resolutions higher than 640 x 480. When the computer is connected to an external monitor, you can use the computer with the cover closed. You can also display images on the external and internal display at the same time. This feature is called SimulSCAN™.

  • Page 58: Using An External Mouse

    Using an External Mouse Although the Extensa comes with a pointing device already installed, you may use an external PS/2 or serial mouse. Turn off the computer. To connect a PS/2 mouse, insert the connector into the the PS/2 port in the rear of the Extensa.

  • Page 59: Using And External Keyboard

    Using an External Keyboard You can connect any IBM-compatible external PS/2 keyboard. Follow these steps. Attach the six-pin Mini-Din connector to the keyboard/mouse connector on the rear of the Extensa. If the external keyboard is not automatically detected by Windows 95, use the Add New Hardware icon in the Control Panel.

  • Page 60: Memory

    You can increase memory by installing any combination of the following RAM options: *****These will be new partnumbers - need Acer partnumbers for their EDO expansion modules. 4 MB RAM Expansion Board (TI Part No. 9803932-0001) 8 MB RAM Expansion Board (TI Part No.

  • Page 61: Audio Options

    Audio Options Your notebook comes with 16-bit stereo audio. A built-in speaker is located on the palm rest. Built-in Speaker Built-in Speaker Besides the built-in speaker, there are three audio ports located in the rear of the Extensa — line-in, microphone-in and line-out. Connecting Audio Devices...

  • Page 62: Miscellaneous Options

    Miscellaneous Options There are additional options available for use with your notebook. These include: Batteries Carrying Case Printers You can purchase spare batteries —Duracell NiMH — from your local computer store for your notebook. For information on these batteries, refer to Chapter 3, Using Battery Power.
  • Page 63 This chapter describes the software supplied with the computer and how to configure application software to run on the computer. Contents Using Supplied Software ... 5-2 Getting Online Help ... 5-3 Guidelines for Installing Applications ... 5-4 Adjusting the Software for the Computer ...

  • Page 64: Using Supplied Software

    Using Supplied Software Your computer is shipped with the following software installed on the hard disk: Microsoft Windows 95 Power-saving utilities PC Doctor (runs from DOS mode only) Various third-party application software...

  • Page 65: Getting Online Help

    Getting Online Help All of the supplied software have online help files, which reduce the need to refer to printed manuals and provide you with information when you are away from printed manuals. To obtain Windows 95 help, select the Start button and then select Help.

  • Page 66: Guidelines For Installing Applications

    Guidelines for Installing Applications Adjusting the Software for the Computer Your computer can execute almost all programs written to execute on AT computers. When installing software, you may need to provide the following information to the installation program: Display Keyboard Mouse The display has an 80-column by 25-line display with 640 x 480 (VGA) resolution.

  • Page 67: Configuring The Computer For The Software

    Guidelines for Installing Configuring the Computer for the Software Some programs require you to modify the way the computer operates to ensure compatibility. Processing Some older applications cannot execute Speed at the higher speeds available with the computer. If the user’s manual for the program indicates a maximum processing speed, you can use the utility to reduce the...

  • Page 68: Using A Password

    Using a System Password The notebook implements a two-password security system: The Setup password prevents unauthorized access to the Setup utility The Power On password prevents unauthorized access to the notebook upon system startup or when the notebook resumes from suspend mode. Setting a System Password To set a password in CMOS, follow these steps: 1.

  • Page 69: Disabling Or Changing A System Password

    Using a System Password If you set the power-on password, you will be prompted for the new power-on password before starting Windows 95. If you set the setup password, you will be prompted for the new setup password before entering the Setup utility. Disabling or Changing a System Password To disable or change a system password:...
  • Page 70 Using a System Password Caution: If you forget the system password, you will not be able to use your computer. To regain access, you must send your computer to the Texas Instrument manufacturing facility in Temple, Texas. This service is not covered by warranty.
  • Page 71 Traveling with Your Computer This chapter helps you prepare for traveling with your computer. Contents Tips for the Traveler... 6-2 What to Take When Traveling... 6-4 Packing the Computer and Accessories... 6-5...

  • Page 72: Tips For The Traveler

    Tips for the Traveler Your Extensa Computer is a precision instrument containing many sensitive components. It should be handled with care. Here are some suggestions for traveling: Never expose the computer to excessive vibration. Do not check the computer as baggage: take the computer as carry-on luggage if traveling by air.
  • Page 73 Changes in temperature and humidity can cause condensation. Allow the computer to return to room temperature, and inspect the display for condensation before turning on the computer. If the temperature change is greater than 18°F (10°C), allow the computer to come to room temperature slowly.

  • Page 74: What To Take When Traveling

    What to Take When Traveling If you plan to use your computer when traveling, you should consider taking the following items: This manual AC adapter Power cords and adapters for the AC adapter and peripherals appropriate for the countries to which you will be traveling Fully-charged spare battery pack(s) Optional battery charger and accompanying AC adapters and power cords...

  • Page 75: Packing The Computer And Accessories

    Packing the Computer and 1. Turn off the computer. Disconnect the AC adapter from the computer and from the AC outlet. 2. Close and latch the display. 3. Tie up cables using twist ties or rubber bands. 4. Enclose peripherals in the bags in which they were originally shipped.
  • Page 76 Care and Troubleshooting This chapter tells you how to clean your computer safely and solve operational problems. Contents Cleaning the Computer ... 7-2 Troubleshooting Tips ... 7-3 Startup Error Messages ... 7-4...

  • Page 77: Cleaning The Computer

    Cleaning the Computer Regularly take the time to check your computer and clean the screen, keyboard, and case to ensure trouble-free computing. Caution: Never use alcohol, benzene, thinner, or strong chemical agents that could damage the computer’s case, and never apply liquid directly to the computer, only to a clean cloth.

  • Page 78: Troubleshooting Tips

    Computer does not come on when power switch is pressed Computer power is on but screen is blank Computer indicates an error at start-up Troubleshooting Tips Low battery; use AC adapter and recharge battery. Ensure AC adapter cable and power cord are securely connected.

  • Page 79: Startup Error Messages

    Startup Error Messages CMOS Battery Bad CMOS Checksum Error Disk Boot Failure Diskette Drive Controller Error or No Controller Present Diskette Drive Error Diskette Drive Type Mismatch Equipment Configuration Error Hard Disk 0 Error Contact your dealer or an authorized service center. Contact your dealer or an authorized service center.
  • Page 80 Startup Error Messages Hard Disk 0 Extended Type Error Insert system diskette and press <Enter> key to reboot I/O Parity Error Keyboard Error or No Keyboard Connected Keyboard Interface Error Memory Size Mismatch Missing operating system Non-system disk or disk error.
  • Page 81 Startup Error Messages Pointing Device Error Pointing Device Interface Error Protected Mode Test Fail RAM BIOS Bad RAM Parity Error Real-Time Clock Error Video RAM BIOS Bad Contact your dealer or an authorized service center. Contact your dealer or an authorized service center.

  • Page 83: Appendix A Where To Get Help

    Texas Instruments and your Texas Instruments authorized reseller want you to succeed with your TI product. If you are in the United States or Canada and have questions about or operating difficulties with your TI product, follow these steps to get support.
  • Page 84 Where To Get Help Call TI Express to order options In the U.S. and Canada For all other locations, dial direct: TI Express hours of operation are 8:00 am to 6:00 pm Central Standard Time, Monday through Friday. For information about other TI products, call the Customer Response Line In the U.S.
  • Page 85 Worldwide Sales Offices Australia Texas Instruments Australia Ltd. 6-10 Talavera Road North Ryde, NSW 2113 Tel: (02) 878-9000 Fax: (02) 805-1186 Royal Domain Centre 14th Floor 380 St. Kilda Road Melbourne, VIC. 3004 Tel: (03) 696-1211 Fax: (03) 696-4446 Belgique/België (Belgium) S.A.
  • Page 86 Worldwide Sales Offices France Texas Instruments France Produits de Productivité Personnelle 8-10 Avenue Morane Saulnier, B.P. 67 78141 Vélizy Villacoublay cedex Service après-vente Tel: (1) 34 65 00 05 Telex: 698884 Greece (Call Middle East/Africa) Holland S.A. Texas Instruments Belgium N.V.
  • Page 87 Worldwide Sales Offices Latin America Region Texas Instruments P.O. Box 149149, MS 2223 Austin, Texas 78714-9149 U.S.A. Tel: (512) 250-4051 Fax: (512) 250-7456 Malaysia Texas Instruments Malaysia Sdn Bhd - Asia Pacific Division 100 Jalan Tun Perak Lot 36-1, Menara Maybank 50050 Kuala Lumpur Tel: 02-03-2085708/02-03-2086001 Fax: 02-03-2306605...
  • Page 88 Worldwide Sales Offices Sverige (Sweden) Texas Instruments International Trade Corporation (Sverigefilialen) Box 30 S-164 93 Kista Isafjordsgatan 7 Tel: (08) 752 58 00 Fax: (08) 751 97 15 Taiwan Texas Instruments Taiwan Ltd. 26F, 216, Sec. 2, Tun Hua S. Road, Taipei 106, Taiwan Tel: (02) 376 2889 Fax: (02) 377 2908...

Table of Contents