Table of Contents
Advertisement
xp CDR785/00 engels.4
14-11-2000 16:30
High speed recording
High speed recording of an entire disc, a track, a
program or a track edit
CDR
W
AUX
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc you wish
to record from.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ¡ JOG CONTROL ™ to select one of the following
high speed record modes:
If a disc from the CD changer is selected:
CD FAST ?: for high speed recording of an entire disc.
• Continue with step 5.
TRACK FAST ?: for high speed recording of a track.
• Press YES to confirm.
• Rotate ¡ JOG CONTROL ™ to select the track.
REC TR ? and the tracknumber are displayed.
• Continue with step 6.
If CD changer program mode is available:
PROG FAST ?: for high speed recording of the
selected disc or of the program.
If CD changer track edit mode is available:
A-B FAST ?: for high speed recording of the A–B
track.
5 Press YES to confirm your selection.
Both decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either RECORD CD1 (or 2, 3)?, RECORD PROG ?
or RECORD A-B ? is displayed.
STEP
1
2
3
4
5
6
CD
RW
6 Press YES to start high speed recording.
The arrow lights,
speed recording starts and the actual recording time left
starts to count down.
• To check the elapsed recording time, press DISPLAY. This
can be done during recording.
• Recording will stop automatically.
Pagina 23
RECOR D
REC LEVEL BALA NCE
TEXT
PROG
TRAC K EDIT
CD CD
JOG CONTR OL
COMP ILE CD
REC TYPE
NO
YES
ERASE
FINALIZ E
R
TEXT
TOTAL
TRACK
TIME
TOTAL
REM
REC
TRACK
TIME
7
8
9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD
RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
FINALIZE
RECORD IN PROGRESS
is shown, high
RECORDING IN PROGRESS
• To stop recording manually, press STOP 9.
• If STOP was pressed within 3 seconds after YES, no
recording will take place.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
'Finalizing CDR & CDRW discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
Normal speed recording and listening
Normal recording and listening of an entire disc, a
track, a program or a track edit
CD TEXT EDIT ING
CDR
W
AUX
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Follow step 2 and 3 of "High speed recording".
3 Rotate ¡ JOG CONTROL ™ to select one of the following
normal record options:
If CD changer is selected:
CD LISTEN ?: for listening to the entire disc during
normal recording
• Follow step 5 and 6 of "High speed recording".
TRACK LISTEN ?: for listening to the track during
normal recording
• Press YES to confirm.
• Rotate ¡ JOG CONTROL ™ to select the desired track.
REC TR ? and the tracknumber is displayed.
• Continue with step 6 of "High speed recording".
If CD changer program mode is available:
PROG LISTEN ?: for listening to the program during
normal recording
If CD changer track edit mode is available:
A-B LISTEN ?: for listening to the A–B track during
normal recording
ALC
4 Follow step 5 and 6 of "High speed recording".
Note: If required the recording level can be set first, using the
REC LEVEL key. See "Rec Level key" under "Recording
General".
INTERNAL RECORDING
RECOR D
REC LEVEL BALA NCE
TEXT
PROG
TRAC K EDIT
CD CD
JOG CONTR OL
COMP ILE CD
REC TYPE
NO
YES
ERASE
FINALIZ E
23
Advertisement
Table of Contents
