[Hdc-Tm20/Hdc-Hs25]; Confirming Remaining Capacity On The Copy Destination - Panasonic HDC-SD20 Operating Instructions Manual

Playback
5
Editing
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in
this unit and a built-in memory/HDD.

Confirming remaining capacity on the copy destination

≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards
following the instruction on the screen.
In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD
card.
≥ If you divide the scenes (l 86), and copy by scene selection, it is possible to copy matching the
remaining capacity of the media, or only the necessary parts.
∫ Media information display
¬ Change the mode to
media to confirm the media information. (l 74)
Select the menu. (l 29)
SD card information display
[SETUP] # [CARD STATUS] # [YES]
Built-in memory information display
[SETUP] # [Built-in Memory STATUS] # [YES]
HDD information display
[SETUP] # [HDD STATUS] # [YES]
≥ Touch [EXIT] or press the MENU button to close the indication.
/
≥ The 16 GB built-in memory or 100 GB built-in HDD requires some space to store information and
manage system files, so the actual usable space is slightly less than the indicated value. The usable
built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of
this unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
Copying between SD card and Built-in
Memory/HDD

[HDC-TM20/HDC-HS25]

and touch the play mode select icon to select desired
89
VQT2B44