Panasonic HDC-SD20 Operating Instructions Manual page 66

Function
Hi-speed burst
shooting
[25 Frames/sec]:
72 still pictures are recorded
continuously at the rate of
25 per second.
The picture size is
2.1
(1920k1080).
[50 Frames/sec]:
180 still pictures are
recorded continuously at the
rate of 50 per second.
The picture size is
0.9
(1280k720).
66
VQT2B44
Recording is done continuously at the rate of 25 or 50 still
pictures per second.
Use this function to record an object with fast movement.
≥ Change the mode to
≥ The intelligent auto mode is set to off. (l 42)
1
Select the menu. (l 29)
[PICTURE] # [HI-SPEED BURST] # desired setting
M
2
Press the
flashes in red during recording.
≥
≥ First press the
focus and record. It will automatically focus if you press fully once,
so it is convenient when recording objects moving back and forth.
3
Touch [Record] or [Delete].
M
[Record]: Pictures are stored.
[Delete]: All pictures are deleted.
4
(Only when [Record] is selected in step 3)
Touch [REC ALL] or [SELECT].
[REC ALL]: All pictures are stored.
[SELECT]: Pictures are stored by specifying range.
5
(Only when [SELECT] is selected in step 4)
Touch the range of pictures that will be stored.
A Start point
B Finish point
≥ Previous (Next) page is displayed by touching
* Only select the picture for start point if only 1 picture is to be
stored.
A confirmation message is displayed when [ENTER] is touched
after selecting the start point and finish point.
Touch [YES] to store the pictures.
≥ Set [HI-SPEED BURST] to [OFF] to cancel the function.
Effect/Setting method
.
button.
button halfway, then press it fully to set the
*
/ .