Panasonic HDC-SD20 Operating Instructions Manual page 31

PICTURE
[QUALITY]
*1
[HI-SPEED BURST]
[SELF TIMER]
[FLASH]
*1
[FLASH LEVEL]
*1
[RED EYE]
[SHTR SOUND]
MEDIA SELECT
Media to record can be set to [Built-in
Memory] or [SD CARD].
Media to record can be set to [HDD] or [SD
CARD].
(l 51)
(l 66)
(l 67)
(l 67)
(l 67)
(l 68)
(l 68)
*2*3
SETUP
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[OFF]
[CLOCK SET]
[SET WORLD TIME]
[DATE/TIME]
[DATE FORMAT]
[ECONOMY]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns
off to save battery life.
≥ The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD
burner, printer etc.
jPRE-REC is used
[QUICK POWER ON]
[QUICK START]
[REMOTE CONTROL]
[REC LAMP]
The recording lamp lights up during
recording and flashes when the unit
receives a signal from the remote control or
when the self-timer is counting down. When
this is set to [OFF], it does not light during
recording.
[ON]
1h30m
A
R 1h20m
(l 34)
(l 36)
(l 34)
(l 35)
*7
(l 45)
(l 44)
(l 39)
31
VQT2B44