Download Print this page
Pentair 5001825 Brochure

Pentair 5001825 Brochure

Commercial pool heater

Advertisement

Quick Links

Powerful, efficient, and reliable, MegaTherm
heaters are designed for commercial, institutional and large
residential pools where economical performance and rapid
heat-up are required. Available in indoor and outdoor
models, with twenty-two sizes from 500,000 to 5,000,000
BTU/h to precisely match any heating requirement.
MegaTherm is designed to deliver efficiencies as high as 82%.
Integral finned copper tubes are rolled directly into the headers, and
conformal heat exchanger baffles and an eight-fins-per-inch tubing
configuration maximize combustion heat extraction. We've also
designed MegaTherm to be simple to service. Heat exchanger
header covers are field-removable for complete inspection of tubing
and header passages, and the heat exchanger is replaceable
without disassembly of the burners or combustion chamber.
MegaTherm is design certified to the ANSI
Gas-Fired Pool Heaters. (Outdoor 500–1825 units are certified for
use without the addition of a draft diverter or external vent. Indoor
units incorporate a built-in draft diverter and require only vent
piping.) Salt water models (500–1825) are available with cupronickel
alloy heat exchanger tubes and bronze headers and header covers.
pool
®
®
Z21.56 Standard for
MegaTherm
High Performance Gas Fired
Commercial Pool Heater
Standard Features
Reliable operation on natural or propane gas.
Electronic ignition.
Built-in draft diverter (indoor models) simplifies installation.
Flow switch standard on all models.
Integral pump assures proper water flow (Models 500–1825).
Automatic gas valve.
Stainless steel burners, with slide-out burner tray for easy
maintenance and long life (Models 500–1825).
Galvanized steel jacket with acrylic finish for strength and durability.
High temperature refractory firebox liner to 2000° F for
greater efficiency.
Easy-to-service header flanges.
Corrosion-resistant glass-lined or bronze headers.
Integral lined copper tube heat exchanger for higher efficiency.
Electronic temperature control for accuracy. (Models 500–1825;
model configuration varies slightly by size.)
One-year limited warranty. See warranty for details.
®

Advertisement

loading

Summary of Contents for Pentair 5001825

  • Page 1 Powerful, efficient, and reliable, MegaTherm heaters are designed for commercial, institutional and large residential pools where economical performance and rapid heat-up are required. Available in indoor and outdoor models, with twenty-two sizes from 500,000 to 5,000,000 BTU/h to precisely match any heating requirement. MegaTherm is designed to deliver efficiencies as high as 82%.
  • Page 2 3. Find the closest square footage in the 10° F (6° C) Temperature Difference column, and the heater models which correspond to it. For normal conditions, Pentair recommends using the 10° F Temperature Difference columns; this will provide a temperature increase of approximately 6° F per 24 hour period.
  • Page 3 NOTES: 1. For high altitude pools, reduce the surface area figures shown in the charts by 4% for each 1000 ft. above sea level. (No derating is necessary up to 2000 ft. above sea level.) 2. Pentair maintains a policy of continuous improvements and therefore reserves the right to change specifications without notice.
  • Page 4 Outdoor, Spark Ignition, Less Pump, Cl-Cu-Ni HX, Std. Unit, Nat. Gas ® Cupronickel alloy heat exchanger models are available. Contact the factory for part numbers. 1620 Hawkins Avenue Sanford, NC 27330 Phone: 800-831-7133 Fax: 800-284-4151 www.pentairpool.com ©2008 Pentair Water Pool and Spa, Inc. All rights reserved.

This manual is also suitable for:

Mt0500in09c1pcMt0600in09c1pcMt0715in09c1pcMt0850in09c1pcMt0999in09c1pcMt1010in09c1pc ... Show all