Specifications - Peavey CS 1800 G Operating Manual

Output Power: (typical value)
Stereo mode, both channels driven:
2 ohms, 1 kHz, 1% THD: 900 W RMS per channel
4 ohms, I kHz, 1% THD: 600 W RMS per channel
8 ohms, 1 kHz, 1% THD: 350 W RMS per channel
Bridge mode. mono:
4 ohms, 1 kHz, 1% THD: 1800 W RMS
8 ohms, 1 kHz, 1% THD: 1200 W RMS
Rated Output Power:
Stereo mode, both channels driven:
4 ohms, 20 Hz to 20 kHz, 0.04% THD: 550 W RMS
per channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD: 300 W RMS
per channel
Power Bandwidth: (typical value)
Stereo mode, both channels driven
Slew Rate: (typical value)
Stereo mode, each channel: 40 volts per pSec
Bridge mode, mono: 80 volts per ySec
Total Harmonic Distortion: (typical)
Stereo mode, both channels driven:
20 Hz to 20 kHz, 4 ohm rated load: Less than 0.04%
Input Sensitivity & Impedance:
Input attenuator set @ FCW:
k ohms (+33 dB)
20

SPECIFICATIONS

Frequency Response: (typical value)
Stereo mode, both channels driven:
Damping Factor: (typical value)
Stereo mode, 8 ohms, I kHz: Greater than 300
Hum & Noise:
Stereo mode, below rated power, 4 ohms: 100 dB,
unweighted
Power Consumption:
Stereo mode, both channels driven:
A @ 230 V AC
6.8
Cooling System:
Dual 2 speed fans
Switchable with LED
Dimensions & Weight:
Height: 3.50" (8.9 cm)
Width: 19" (48.3 cm)
Depth 17" (43.2 cm)
Weight 35 lbs. (15.9 kg)
Two Rack Space, Class BG, Dual Rail Design With
NSSER Topology
(NSSER: non-saturating series single emitter resistor)
Patent Pending.
9