Peavey A/A-8P Specification Sheet

™
A/A-8P
Eight-Channel
Preamp

SPECIFICATIONS

Inputs:
Euro type connector, balanced low or high
impedance
Outputs:
Euro type connector, balanced low
impedance 100 ohms
Output Level:
+15 dBu with Limiter activated (rated)
+26 dBu maximum
Controls:
8-input gain controls (tamper resistant,
flush-mount, screwdriver slotted)
Noise:
-75 dB below full output
THD:
Less than 0.02% at 1 kHz signal input
Activity LED:
Activated at or above 77 mV (-20 dBu)
Clip LED:
Activated at or above 4.4 volts (+15 dBu)
Limiter Threshold:
+15 dBu
S P E C I F I C A T I O N S
Phantom Power:
+48 volts defeatable each channel via
dipswitch. High level line setting will
override defeat switch and shut off
phantom to channel.
Dimensions:
1.75" (H) x 19" (W) x 11" (D)
Weight:
8.6 lbs
Color:
Gray
Power Consumption:
120 V AC, 60 Hz, 20 W
INPUT
Mic Setting (low level):
Frequency Response: 20 Hz to 30 kHz
( 1.5 dB)
Maximum Gain: 65 dB at "max" setting
Maximum Input Level: 160 mV (-14 dBu)
Minimum Gain: 28 dB at "min" setting
Minimum Input Level for Full Output:
2 mV (-52 dBu)
Input Impedance: 2 K ohms
E.I.N.: 125 dBV (150 ohms, 65 dB gain)
Line Setting (high level):
Phantom power automatically defeated
Maximum Gain: 28 dB
Maximum Input for Rated Output:
14.8 volts (+26 dBu)
Minimum Gain: -10 dB attenuation of
input signal
Minimum Input Level for Rated Output:
172 mV (-13 dBu)
Input Impedance: 20 K ohms
DESCRIPTION
The Peavey Architectural Acoustics
™
A/A-8P Preamp is a high quality mic/
line preamp with eight separate
transformer balanced inputs. Each
channel provides a level control with a
selectable mic or line inputs to
accomodate a wide range of input
levels.
™
The A/A-8P front panel provides
immediate indication of signal status
with an activity and clip LED. Included
in each channel's signal path is a level
limiter which is preset at the optimum
input level for the MM-8840 and
MM-8830 Digital Interface. Also, each
channel provides industry standard
+48 volts phantom power. Both the
limiter and phantom power are user
enabled on a per channel basis with
convenient dip switches located on the
back panel. The inputs and outputs are
"Euro" type connectors. And, to reduce
unauthorized or accidental level
changes, we have provided tamper
resistant level controls that are installer
adjustable with a screw driver.
The A/A-8P is ruggedly packaged in
an industry standard 19" single rack
space unit.
®
ARCHITECTURAL ACOUSTICS®
®
TM