Advertisement
5 5 5 5 5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
3
the Select button
so the TRE indication appears on the display
panel. Within 5 seconds of choosing the Treble mode, press the
or
side of the Level control
as desired. The level will be shown on the display panel from a
minimum of -10 to a maximum of 10 (0 indicates flat response).
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.
6 6 6 6 6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
appears on the display panel.
Within 5 seconds of choosing the Balance mode, press the
2
side of the Level control
to adjust the stereo balance to the left
channel speakers or the
right channel speakers. The balance position will be shown on the
display panel from BA.L 10 (full left) to BA.r 10 (full right). When
the volume level between the left and right speakers is equal,
BAL 0 will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
7 7 7 7 7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button
appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the
or
adjust the front-rear speaker balance as desired. The fader
2
to adjust the treble response
3
so the BAL indication
side of the control to adjust it to the
3
so the FAd indication
side of the Level control
position will be shown on the display panel from FA.r 10 (full
rear) to FA.F 10 (full front). When the level between the front and
rear speakers is equal, Fad 0 will be shown on the display panel.
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.
8 8 8 8 8
LOUDNESS CONTOUR (LOU)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
characteristics of human hearing. Press the button to activate this
feature and the indication LOUD will appear on the display panel.
Pressing the button again will deactivate the feature (the LOUD
indication will disappear from the display panel).
9 9 9 9 9
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system
( MUTE will appear on the display panel). Pressing the button
again or adjusting the Volume control
level setting in use before the Mute function was activated.
bl bl bl bl bl
AM/FM BAND SELECTOR (BND)
Each time this button is pressed, the radio band is changed. The
indications AM1, AM2, FM1, FM2 or FM3 will appear in the
display panel according to your selection.
During CD changer play, pressing this button will return to radio
or tape operation, depending on which was the last mode in use
prior to CD changer operation.
bm bm bm bm bm
MANUAL UP/DOWN TUNING (
To manually select a radio station, momematrily press the Up
2
to
Tuning (
) button to advance the unit one digit higher or the Down
-2-
2
will return to the volume
/
)
Advertisement
