Page 2
I n s t a l l i n g t h e A d a p t e r To install the adapter: Press the button on the battery compartment door (located at the bottom of the printer’s handle) and slide it open, pulling firmly. Pull the door completely off the printer and lay it aside.
Page 3
Pushing firmly, put the new battery compartment door on the printer. The adapter pack cord should stick out of the notch in the door. Connect the adapter pack and the power supply by lining up the connectors and screwing them together. Notch Plug the power cord into the power supply.
Page 4
Visit www.paxar.com for sales, service, supplies, information, and telephone numbers for our locations throughout the world. TOLL FREE: 1-800-543-6650 (U.S.A.) 1-800-363-7525 (Canada)