ParaBody 705102 Assembly Instructions Manual

Reggie white all pro gym assembly instructions

Download this manual

Serious Steel

705102

REGGIE WHITE ALL PRO GYM

ASSEMBLY INSTRUCTIONS

THANK YOU forpurchasing

the

REGGIE WHITE ALL PRO GYM!

PLEASE read these instructions

thoroughly and keep them for future reference.

PARABODY

strongly

recommends that this product be assembled by two

adtilts. This product must be assembled on a flat, level surface to assure it's

proper function.

TOOLS REQUIRED: Ratchet,

9/16" Socket, 9/16" Wrench, Adjustable

Wrench, Tongue & Groove Pliers,

Rubber Mallet or Hammer.

IF you have any problem in the assembly or use of this product, please contact

the PARABODY Customer Service Department at 1-800-328-9714.

ParaBody, Incorporated

14150 Sunfish Lake Boulevard

Ramsey, MN 55303

1-800-328-9714

6587901

03/01/96

Page 1 9/16" Socket, 9/16" Wrench, Adjustable Wrench, Tongue & Groove Pliers, IF you have any problem in the assembly or use of this product, please contact the PARABODY Customer Service Department at 1-800-328-9714. ParaBody, Incorporated 14150 Sunfish Lake Boulevard Ramsey, MN 55303...
Page 2 705102 REGGIE WHITE ALL PRO GYM ASSEMBLY INSTRUCTIONS SELECT SHAFT BLACK NYLON BOLTS 2 5/4 5-1,/4 PLATE UPRIGHT 2 3/4 SEAT ROLLER PAD SWIVEL 2 3/4 ~OLLER PAD (4) LEG EYTENSION 2 3/4 03/01/96 6587901...
Page 3 3. Do not allow minors or children to play on or around this equipment. 4. Excercise with care to avoid injury. 5. If unsure of proper use of equipment, call your local ParaBody distributor or call the ParaBody customer service department at 1-800-328-9714.
Page 4 705102 REGGIE WHITE ALL PRO GYM ASSEMBLY INSTRUCTIONS PARTS LIST: ***PLEASE IDENTIFY ALL PARTS BEFORE BEGINNING ASSEMBLY ITEM PART # DESCRIPTION 1 ... 6016401 ... ROLLER PAD, 3/4 X 3-3/16 X 7 ... 2 ... 6266001 ... SHAFT, SELECT 3/4 DIA 15 HOLE ...
Page 5 705102 REGGIE WHITE ALL PRO GYM 1. Attach two 2" COVER CAPS and one 2" END CAP to BASE as shown on drawing. Insert one 3 x 2" END CAP into each end of TOP BOOM as shown on drawing.
Page 6 ,705102 REGGIE WHITE ALL PRO GYM ASSEMBLY INSTR_[UCTIONS 20. SECURELY assemble two PULLEYS to 5-1/4 PLATE as shown on drawing using two 3/8 X 1- 3/4 bolts and two 3/8 locknuts. 21. SECURELY assemble PULLEY to TOP BOOM using one 3/8 X 2-3/4 bolt, one 3/8 locknut and two 3/8 flange spacers.