ParaBody 425 Assembly Instructions Manual page 21

× 3-]./2"
A. Inserf ~wo I/2 IN. FLANGE BEARINGS (95) into ~he PRESS SUPPORT TUBE 18) as shown.
SECURELY assemble the PRESS BACK SUPPORT (3) fo the PRESS SUPPORT TUBE (8) as shown
drawing, using one 1/2 X 5-1/2 IN. BOLT (68), fwo 1/2 IN. WASHERS (65), and one 1/2
LOCK NUT (gO). (TIGHTEN THE CONNECTION ENOUGH TO REMOVE THE PLAY, YET ALLOWING
PRESS BACK SUPPORT TO ROTATE FREELY)
Go
SECURELY assemble one 1/2 IN. SPRING PIN ASSEMBLY (51) to the SPRING PIN HOUSING,
the PRESS SUPPORT TUBE (8) as shown. (!!! IMPORTANT !!! TIGHTEN THE NUT OF THE SPRING
PIN ASSEMBLY SECURELY)
22