Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technics RQT7230-3Y
Summary of Contents for Technics RQT7230-3Y
-
Page 1: Operating Instructions
Operating Instructions DJ Mixer SH-MZ1200 The photograph shows the silver model. Model No. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. This manual was printed with soy based ink. RQT7230-3Y... -
Page 2: Table Of Contents
Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Table of contents Supplied accessories ... 2 IMPORTANT SAFETY INSTRUCTIONS ... 3 Product service ... 4 Main features ... 4 Component part names ... 5 Connections ... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. -
Page 4: Product Service
For product information or assistance with product operation: In the U.S.A., refer to “Customer Services Directory” on back cover. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you. -
Page 5: Component Part Names
Component part names The unshaded numbers etc, correspond to the numbered illustrations. The shaded numbers Control panel Input switch for adjusting left and right input individually (L/R SPLIT) ... Input switch (CH1-CH4) ... CD/LINE DIGITAL: Line or CD input, Digital input LINE: Line input PHONO 1-3: Turntable phono input Input control knob (CH1-CH4) ... -
Page 6: Front Panel
Component part names Front panel Cross fader curve control switch (C.FADER CURVE) ... Curve switch (CURVE) Cross fader operation switch (CROSS FADER) Fader operation switch (CH1-CH4 FADER) ... Headphone terminal (PHONES) ... Fader start (ON, OFF) switch (FADER START) ... RQT7230 Rear panel Power button (POWER... -
Page 7: Connections
Connections Output side connections Connect the various equipment to the DJ mixer using stereo connection cables, connection cables and appropriate cables (Each sold separately). When connecting, make sure to turn all equipment power off. White (L) Stereo connection cables Red (R) Speakers (Not included) Amplifier... -
Page 8: Input Side Connections
Connections Input side connections Connect the DJ mixer and various equipment with stereo connection cables, control cables and connection cables (Each sold separately). Connect the AC power supply cord after completing all the other connections. The power cord inlet for this unit (AC IN the rear panel. -
Page 9: Mixing (Basic Operations)
Mixing (Basic operations) L/R SPLIT Press [POWER The POWER lamp comes on after the power is turned on. Turn [L/R SPLIT (CH1 CH2)] and [L/R SPLIT (CH3 CH4)] to OFF Select CH1 or CH2 input, CH3 or CH4 input to use the PLAY MODE's (L) and (R) individual adjustment feature ( Switch [SEPARATE OUT] to OFF Turn on to activate the play mode SEPARATE OUT function... -
Page 10: Using The Microphone
Mixing (Basic operations) Changing the channel fader, cross fader operation method Use the channel fader switch to change the operation method for each channel. (e.g. using CH1) Switch [CH1 FADER] and [CROSS FADER] NORMAL: Operation is as indicated on the panel REVERSE: Operation is reverse as indicated on the panel Changing the cross fader curve Select from 1 of 3 types of cross fader startup curves. -
Page 11: Additional Mixing Operations
Additional mixing operations Adjusting the effect You can adjust the volume level and select the output point when using an externally connected effector. On the channel you have selected to use effect output Switch [EFFECT] to ON Outputs to the external effector. Switch [PRE/POST] and select the output point PRE: Outputs before the channel fader... -
Page 12: Using Play Mode Functions
Using play mode functions Individually adjusting the left (L) and right (R) input Using the play mode function, by separating the left (L) and right (R) selected input channel you can individually adjust the left (L) and right (R) volume and sound. Switch to either [L/R SPLIT (CH1 CH2)] or [L/R SPLIT (CH3 CH4)] and select the channel to adjust individually... -
Page 13: Fader Start Function
Fader start function You can start music play from the SL-DZ1200 direct drive digital turntable (not included) using the channel fader and cross fader by connecting the digital turntables to CH1 and CH4. (A control cable is necessary for this connection. Before use •Turn [MODE] to TURNTABLE on the rear panel of the digital turntables connected to CH1 and CH4. -
Page 14: Block Diagram
Block diagram RQT7230... -
Page 15: Specifications
Specifications Input sensitivity/input impedance PHONO (TRIM center) LINE (TRIM center) EFFECT RETURN Rated output voltage/Output impedance MASTER 1, 2 (RCA) MASTER 1 (XLR) MONITOR REC OUT EFFECT SEND Headphone output Frequency response MASTER 1, 2 REC OUT EFFECT RETURN Digital audio input Coaxial digital input Compatible sampling rate 48 kHz/44.1 kHz/32 kHz (PCM) -
Page 16: Warranty (U.s.a.)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.comm or, send your request by E-mail to: npcparts@us.panasonic.com...