Panasonic BB-HCM580 Specifications

View Places That You Couldn't
Even See Before
The BB-HCM581/HCM580 camera lets you monitor very large
areas with its maximum 360
A full 42x power zoom also makes it possible to check
places in super-fine detail. Thanks to its PoE*
the camera can be installed in places where it is difficult
to provide power, like on factory and warehouse ceilings,
or near a building entranceway or elevator hall.
And dual-stack IPv4/IPv6 protocol prepares it
for IPv6 services. This lets you grab every business
possibility by breaking distance and time barriers
with Zero Distance Management*
*1-1 PoE (Power over Ethernet) supplies power through an Ethernet cable.
*1-2 Not supported by the BB-HCM580.
*2 For details, see the bottom of this page.
Stores
Zero Distance Management is a new
business style made possible by
Panasonic network cameras.
It allows safe, smooth, economical
business management that is totally
free from conventional distance
and time limitations.
o o
pan and 158 tilt functions.
capability,
1
.
2
School
The PoE function supplies power through an Ethernet cable*. DDNS service and UPnP
compatibility make it easy for anybody to set up and use the system over the Internet.
BB-HCM581 Power over Broadband
Ethernet hub router
Monitoring Site
Access www.viewnetcam.com for registration information.
Warehouses
System Diagram
Modem

Network Camera

BB-HCM581
PoE type
BB-HCM580
Indoor Use Only
* This logo mark is
issued by the IPv6
Ready Logo Program
Committee, an IPv6
promotion group
established mainly by
See There
When You Can't Be There™
Restaurant
Office Outdoors
*An optional AC adaptor can also be used.
the IPv6 Forum.