Download Print this page

Audiovox Pursuit PRO 9246CH Owner's Manual

Pursuit series active/passive operation remote keyless entry owner's manual

Advertisement

Quick Links

CONGRATULATIONS! Your purchase of this state-of-the-art security system expresses a
deep concern for the security of your vehicle, its contents, and passengers. To fully appreciate
the many functions and safeguards incorporated in this system, please spend a few minutes
reading this manual. You may find unexpected features that could mean the difference
between "protected" and "fully protected"
IMPORTANT ! In order to provide the highest possible level of security to your vehicle, this
system is equipped with selectable manual override circuitry. It is possible that you will need
to manually override your security system if the transmitter becomes lost, or inoperative due
to battery failure. Reading the sections on "MANUALLY OVERRIDING YOUR SYSTEM" is
necessary to fully understand the procedure required to enable your vehicle in such
situations. In addition, the chart on the last page of this manual has a section for the
particular features and options installed in your vehicle as well as the override method
selected. Valet Switch manual override is pre-selected from the factory, however, the
system can be configured for "Custom Code" operation. Confirm the override mode selected
on the last page of this manual, and familiarize yourself with the section on it's operation.
FEATURES :
w 2 Three Button Programmable RF Transmitters (capable of accepting 4 transmitters)
w Separate Lock/Unlock Transmitter Buttons
w Four Channel Receiver
w Code Hopping Technology
w Selectable Manual Override Mode
w User Programmable Manual Override Code
w Active or Passive Arming Selectable
w Programmable Auto Lock On / Off
w Programmable Auto Unlock, Drivers, All, None
w Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds / 1 Sec, Dbl. 1 Sec
w Programmable Active or Passive Door Locks
w RF Inhibit with ignition on
w Interior Light Flasher (Arm/Disarm/Programming)
w Remote Trunk Release (must have electronic trunk release)
w LED Status Indicator Displays Arming, Armed, Disarmed & Valet
OPTIONS :
w Parking Light Flasher (Relay Required) (Arm/Disarm/Programming)
w Starter Disable (Relay Required)
w Horn Output (Relay Required)
w Multiple Vehicle Capable
w Remote Vehicle Starter
w Remote Power Window Roll Up
w Remote Garage Door Interface
Note: The "Arming" and "Disarming" references in this manual apply only to those vehicles
which have the optional starter inhibit relay installed, and take place when the vehicle
is locked and unlocked respectively.
Model PRO 9246CH
Owner's Manual
Active/Passive Operation
Remote Keyless Entry
128-6628
1 of 8

Advertisement

loading

Summary of Contents for Audiovox Pursuit PRO 9246CH

  • Page 1 Note: The "Arming" and "Disarming" references in this manual apply only to those vehicles which have the optional starter inhibit relay installed, and take place when the vehicle is locked and unlocked respectively. Model PRO 9246CH Owner's Manual 128-6628 1 of 8...
  • Page 2 NOTE: Because this system has an optional horn annunciation circuit, where light flash is mentioned, the horn may also beep a tone pattern synonymous with the flash pattern of the lights. Locking / Arming (Active) 1. Turn off the engine, exit the vehicle, and close all doors. 2.
  • Page 3: Car Finder

    NOTE: If the optional 2-step unlock feature was installed, then only the driver's door will unlock during step 1 above. To unlock all doors, press the unlock button of the transmitter a second time. 3. Never attempt to disarm the system from a distance that prevents you from opening a door within 30 seconds, when the system is programmed for passive arming as the system will begin to re-arm until a door is opened.
  • Page 4 Programming Your Custom Override Code: Unlike override switches easily found, and defeated, this security system allows the consumer to program a personal override code, offering a higher level of security. To take advantage of this option, programmable feature # 6 must be selected for the Custom Code Option.
  • Page 5 7. Within 10 seconds, begin to press and release the push button switch to set the units digit. (As per the example, press and release 2 times to set the units digit to 2). 8. Turn the ignition switch to the off position. Immediately observe the LED flash pattern. You will note the LED flashing five times, pause, and then flash two times, pause.
  • Page 6 o Remote Electric Trunk Release o Remote Car Starter o Remote Window Closure o Remote Garage Door Interface NOTE: In addition there may be a second optional feature connected to your system that when the same transmitter button is pressed and released 2 times within 3 seconds (double pressed), the second optional feature will activate.
  • Page 7 THIS PAGE LEFT BLANK INTENTIONALLY 128-6628 7 of 8...
  • Page 8 © 2003 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-6628 128-6628 8 of 8...

This manual is also suitable for:

Pursuit seriesPro 9246ch