Panasonic TC-32LX85 Operating Manual (English, Spanish) Quick Start Manual page 42

Technical Information
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 26)
This function may not work normally depending on the equipment condition.
The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2), VIERA Link
is available for the terminal with the smaller number.
If you connect equipment that has "HDAVI Control 2" (or more) function to the TV with HDMI cable, the sound from DIGITAL
AUDIO OUT terminal can be output as multi channel surround.
"HDAVI Control 3" is the newest standard (current as of December, 2007) for the HDAVI Control compatible equipment.
This standard is compatible with the conventional HDAVI equipment.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and the devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the "HDMI 1 in", "HDMI 2 in" or "HDMI 3 in" menu screen. (p. 22)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
Caution
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected device has an aspect adjustment function, set the aspect ratio to "16:9".
These HDMI connectors are "type A".
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
A device having no digital output terminal may be connected to the input terminal of either "COMPONENT", "S VIDEO", or
"VIDEO" to receive analog signals.
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i.
Match the output setting of the digital device.
For details of the applicable HDMI signals, see below.
* Mark: Applicable input signal for Component (Y, P
525 (480) / 60i
525 (480) /60p
750 (720) /60p
1,125 (1,080) /60i
Note
Signals other than those shown above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Vivid:
Standard:
Cinema:
Game:
Custom (Photo): Customizes each item according to your taste.
Note
Picture mode will be automatically set to "Standard" if you change the Input label from "GAME" to other labels.
Picture mode will be automatically set to "Game" if you change from an Input label other than "GAME" to "GAME" label.
42
VIERA Link
Input signals that can be displayed
horizontal
frequency (kHz)
15.73
31.47
45.00
33.75
Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Recommended for normal viewing conditions with subdued room lighting.
For watching movies in a darkened room. It provides a soft, film-like picture.
For playing video game. This mode will be set automatically if "GAME" is selected from Input label setting (p. 35)
Photo is displayed in JPEG menu.
TM
"HDAVI Control
HDMI connection
, P ) and HDMI
B R
vertical
frequency (Hz)
59.94
59.94
59.94
59.94
Picture mode
(Continued)
TM
"
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
COMPONENT
*
*
*
*
TM
HDMI
*
*
*
*