Setting the handset switch
This unit can work without the handset and handset cradle. When you don't use the handset and cradle, set
this feature to NO HANDSET.
USE HANDSET: Choose when you use the handset and handset cradle (pre-selected setting).
NO HANDSET: Choose when you don't use the handset and handset cradle.
Press (MENU).
1
K
H I
2
Press
, then
Press (START/COPY/SET).
3
Press (‹) or (›) to select the desired setting.
4
Press (START/COPY/SET).
5
Press (MENU).
6
Resetting the advanced features
Use this feature to return the advanced features (see page 61) to their pre-selected settings.
Press (MENU).
1
K
H @
2
Press
, then
Press (START/COPY/SET).
3
Press (‹) or (›) to select "YES".
4
Press (START/COPY/SET).
5
¡If this feature is not required, press (STOP).
Press (START/COPY/SET) again for confirmation.
6
Press (MENU).
7
60
SYSTEM SET UP
.
HANDSET SWITCH
ÿŸ
USE HANDSET [
SYSTEM SET UP
.
SET DEFAULT
ÿŸ
RESET=NO
[
ÿŸ
RESET=YES
[
RESET OK?
RESET COMPLETED
Dial keypad
1
2
3
4
5
6
7
8
9
0
]
(‹)
(›)
Note:
¡After setting NO HANDSET, disconnect and
connect the power cord again.
Dial keypad
1
2
3
4
5
6
7
8
9
0
]
(›)
(‹)
]
(MENU)
(START/COPY/SET)
(MENU)
(STOP)
(START/COPY/SET)