Checking greeting messages
1
Open the station key panel.
Press (SELECT) until the desired greeting is
2
displayed.
Example: Mailbox 3 greeting
Press (CHECK).
3
¡After the beep, the unit will play back the
message.
Adjust the volume using (VOLUME).
Erasing your own recorded greeting messages
1
Open the station key panel.
Press (SELECT) until the desired greeting is
2
displayed.
Example: Message transfer greeting
Press (ERASE).
3
Press (START/COPY/SET).
4
Press (STOP).
5
Note:
¡If you erase your own recorded greeting messages,
the pre-recorded greeting messages will be played.
BOX3-GREETING
TRNS-GREETING
ERASE OK?
GREETING ERASED
Station key panel
(SELECT)
(VOLUME)
(CHECK)
Station key panel
(SELECT)
(START/COPY/SET)
(ERASE)
55