Connecting With An Hdmi (High Definition Multimedia Interface) Terminal - Panasonic Diga DMR-EX77 Operating Instructions Manual

Connecting with an HDMI (High Definition Multimedia Interface) terminal

When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), this unit's output can be switched
to 1080p, 1080i or 720p HD video.
≥Please use the HDMI cables 5.0 meters or less.
Preparation
From the Setup menu (➡ 67), set "Digital Audio Output" to "HDMI and Optical".
Connecting to a TV
Television's
rear panel
This unit's
rear panel
HDMI AV OUT
R-AUDIO-L VIDEO
≥If you are connecting to a TV that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down mixed
(➡ 84) and output as 2 channels, even if connecting with an HDMI
cable. (Some discs cannot be down mixed.)
≥You cannot connect this unit to DVI devices that are incompatible
with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content
Protection) copyright protection that are equipped with a digital DVI
input terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all
when connecting with a DVI/HDMI switching cable. (Audio cannot
be output.)
HDMI IN
S VIDEO A A V OU V OUT T
Connecting to a receiver
HDMI IN
HDMI OUT
HDMI IN
HDMI AV OUT
VIDEO S VIDEO A A V OU V OUT T
Television's
rear panel
Receiver's rear
panel
This unit's
rear panel
RQT8859
17