Album And Picture Operation - Panasonic Diga DMR-EH57 Operating Instructions Manual

Album and picture operation

After performing steps 1–4, page 44
§
Delete Picture
§
Delete Album
[HDD] [RAM] [SD]
Enter Album Name
[HDD] [RAM] [SD]
§
Set up Protection
§
Cancel Protection
[HDD] [RAM] [SD]
Add Pictures
Create Album
[HDD] [RAM] [SD]
Copy to DVD-RAM
[HDD]
Copy to HDD
[RAM]
§
Multiple editing is possible.
[Note]
≥Timer recordings do not start when performing "Add Pictures", "Create Album", "Copy to DVD-RAM" or "Copy to HDD".
≥You cannot perform "Add Pictures" or "Create Album" to a higher folder.
Press [2, 1] to select "Delete" and press [OK].
≥Once deleted, the recorded contents are lost and cannot be restored. Make certain before
proceeding.
≥When deleting an album, files other than the still picture files inside the album will also be deleted. (This
does not apply to folders under the album concerned.)
You can give names to albums.
(➡ 58, Entering text)
≥Album names input using this unit may not be displayed on other equipment.
If set, this will protect the still picture or album from accidental deletion.
Press [2, 1] to select "Yes" and press [OK].
The lock symbol appears when the still picture or album is protected.
≥Even if the protection setting is used by this unit to protect an album, the album
may be deleted by another unit.
1 Press [2, 1] to select "Start" or "Yes" and press [OK].
e.g.,
2 3
Create Album Step 1
HDD Please select album to copy.
- - -
007 008
12. 5.06 Total 24 12. 6.06 Total 3
100_DVD 101_DVD
- - - - - - - - -
Previous Page 02/02
OK
Previous
RETURN
2 Press [3, 4, 2, 1] to select the album that contains the still picture you want
to add and press [OK].
e.g.,
Create Album
Which pictures to copy from the selected album?
Select pictures to copy
Copy all pictures
SELECT
RETURN
OK
[RAM] [SD]
To switch to another higher folder
1 Press [OPTION].
2 Select "Select Folder" and press [OK].
3 Press [2, 1] to select the higher folder and press [OK].
3 Press [3, 4] to select the item and press [OK].
≥If "Select pictures to copy" is selected
Select the still picture you want to add and press [OK].
≥If "Copy all pictures" is selected
All the still pictures in the album will be copied.
4 Press [2, 1] to select "Yes" or "No" and press [OK].
≥If you want to continue copying, select "Yes" and go to step ➁.
Only for "Create Album"
5 Press [2, 1] to select "Yes" or "No" and press [OK].
≥If "Yes" is selected:
You can give names to albums. (➡ 58, Entering text)
≥If "No" is selected:
The recording date of the first picture in the album becomes the album name. (If there is no recording
date information, the date will appear as [--.--.----].)
Press [2] to select "Start" and press [OK].
You cannot copy if multiple albums are selected.
4
Next
Next
DIRECT NAVIGATOR Pic
SD CARD
103__
Album Name
0001 0002
0005 0006
RQT8906
45