Step 1 Assembling The Speakers - Panasonic SC-PT560 Operating Instructions Manual

1
step
Assembling the speakers
[PT565] [PT865]
Front speakers and surround speakers
[PT560]
Front speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ For optional wall mount, refer to page 8.
Make sure you have all the indicated components before starting assembly, setup, and connection.
[PT565] [PT865]
2 Front speakers and 2
Surround speakers
[PT560]
2 Front speakers
Speaker assembly option
Thread the speaker cable through
the base.
Leave about 100 mm
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 8.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
6
[PT565] 4 Stands
≥ 2kstands with short cable:
For front speakers
≥ 2kstands with long cable:
For surround speakers
[PT865]
4 Stands
≥ 4kstands with short cable
Position the
cable between
the ridges.
Leave about 90 mm
Attach the speaker.
[PT560] 2 Stands
≥ 2kstands with short cable:
For front speakers
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
[PT565] [PT865]
[PT565] [PT865]
4 Bases 16 screws
[PT560] [PT560]
2 Bases 8 screws
Screw eye
Wall
(not included)
Approx.
150 mm