Download
Share
Print this page
Audiovox Prestige APS-2K4MS Programming Manual
  1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Car Alarm
  5. Prestige APS-2K4MS
  6. Programming manual
Audiovox Prestige APS-2K4MS Programming Manual

Audiovox Prestige APS-2K4MS Programming Manual

Audiovox car security system programming guide
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Enlarged version
The APS-800/875 Models have a configurable receiver that
allows the transmitter to be programmed to operate the Lock
Unlock functions with one transmitter button or with two transmitter
buttons (separate Lock/Unlock). In addition, the receiver also allows
driver priority function. This driver priority function takes place
when ever a particular transmitter is used to unlock the vehicle
regardless of the selection of one button or two button operation.
The following indicates the receiver programmable slots.
1
Lock/Unlock or Lock
2
Unlock if Programmed
3
Trunk Release & or Remote Start (Optional)
4
Auxiliary Output
5
Auxiliary Output
6
Driver 1 Priority or Separate Output
7
Driver 2 Priority or Separate Output
Receiver channels 6 or 7 will accept the programming of transmitter
channel 1 if used as the Lock/Unlock button, or Channel 2 when
separate Lock Unlock buttons are programmed. In this way, whenever
the transmitter is used to unlock the vehicle, channel 6 or 7, when
programmed, will provide a pulsed ground output. This output can be
connecter to the driver priority function of the vehicle to reset preset
user features. Please consult with your installation centers technician
to see if this feature is available in your vehicle.
Note: A total of 4 transmitters may be programmed into any receiver
channel.
Force programming a transmitter, removing a transmitter or reprioritizing
a transmitter is covered later in this manual.
Also, if you do not program a transmitter button into channel 2 which is
the separate unlock/disarm channel, then whatever button is
programmed into channel 1 will serve as both lock/arm & unlock/disarm.
Model APS-2K4MS

Programming Guide

Advertisement

loading

Related Manuals for Audiovox Prestige APS-2K4MS

Summary of Contents for Audiovox Prestige APS-2K4MS

  • Page 1: Programming Guide

    Model APS-2K4MS Programming Guide The APS-800/875 Models have a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/Unlock). In addition, the receiver also allows driver priority function.

  • Page 2: To Enter The Program Mode

    TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, Press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, Press and hold the button of the first transmitter you wish to control the Lock&Arm feature of your security system until a long chirp is heard from the siren.
  • Page 3 (Repeat this for each transmitter you wish to operate the Channel 4 output) 10. Within 10 seconds, press and release the valet program switch one time. (Siren emits 5 short chirps indicating channel 5 has been entered) 11. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren.
  • Page 4 Enter the transmitter program mode: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, Press and hold the ARM or ARM/DISARM button of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren.

  • Page 5: Replacing The Battery

    2. Enter the transmitter program mode. Using any transmitter button press and hold until a long chirp is heard. If a single chirp or mul- tiple chirps, (up to 7 chirps), are heard, the unit is indicating that the transmitter has already been programmed elsewhere in the receiver. Release the transmitter button and within 5 seconds press and hold until a long chirp is heard.
  • Page 6 9) Mail this form along with your payment to: Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y., 11788 Attn.: TRANSMITTER DEPARTMENT © 2000 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY, 11788 $65.00 X ______ 128-5965...