Printing A Received Email Attachment Automatically (Lan Connection Only) - Panasonic KX-MB3010 Operating Instructions Manual

Panasonic multi-function printer operating instructions
Hide thumbs Also See for KX-MB3010:
Table of Contents

Advertisement

3. Printer
7
Click [Print] or [OK].
3.1.2 Printing on special media
You can print not only on plain paper but also on special
media (transparencies / labels).
L Please refer to page 99 for information on recording
paper.
L To load paper, see page 13.
To print on transparencies
Use transparencies designed for laser printing.
We recommend the following:
®
3M
CG3300/CG5000
L Do not stack more than 25 transparencies at a
time.
L After printing, place transparencies on a flat
surface to cool and to prevent them from curling.
L Do not re-use transparencies that have already been
fed through the unit. This includes transparencies
that have been fed through and ejected without being
printed on.
L Some types of transparencies have instructions
recommending which side to print on. If the print
quality is poor, try printing on the other side of a new
transparency.
To print on labels
Use labels designed for laser printing. We recommend
the following:
®
Avery
5160/5161/5162/5163/5164/5165/5167/5168
®
XEROX
LWH100/LWH110/LWH120/LWH130/LWH140
L Make sure the print side is FACE UP when
loading the labels.
L Do not stack more than 25 labels at a time.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or separated
from the backing sheet.
– Any sheet of labels that has spaces in it where
some of the labels have been removed.
– Labels that do not completely cover the backing
sheet as follows:
28
3.2 Printing a received email
attachment automatically (LAN
connection only)
If you configure the POP server settings beforehand, the
unit will automatically print files attached to an email that
are sent from a compatible unit via the Internet (scan to
email print). This is useful if you want to print only
attached files, without checking your emails.
Important:
L The unit does not print email messages.
L The unit will only print attached files sent from a
compatible unit, which can send emails directly
(without using a computer).
L The attachment file formats that can be printed
are as follows:
– TIFF
– JPEG
– PDF (Image type only. Such as files scanned
from the unit, or scanned from the computer
using Multi-Function Viewer.)
L Received emails and the attached files will be
deleted automatically after printing.
A
B
A Send from a compatible multi-function unit (Example:
"4.1.5 Scan to email address (LAN connection only)",
page 31)
B Email is sent via the Internet (email server)
C Receiving unit prints attached files
1
Start Multi-Function Station.
2
[Utilities] i [Configuration Web Page] i
[Network Configuration]
3
Type "root" as the user name, then enter the
password (feature #155 on page 56). i [OK]
4
Click the [SCAN TO EMAIL PRINT] tab.
5
Set each item.
To activate this feature:
Select [ENABLED] next to [SCAN TO EMAIL
PRINT]. i [Submit]
To set the email server information:
1. Click [Edit] next to [EMAIL SERVER].
2. Enter the email server and POP server
information. i [Submit]
6
Close the web browser.
C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-mb3020

Table of Contents