Learning About Your Breadmaker - Oster 5858 User Manual

Learning About Your Breadmaker

1. Place the breadmaker on a counter
where the plug will reach an outlet.
DO NOT plug the machine into the
wall outlet yet. You will be shown later
when to do this.
Make sure you can open the breadmaker
top without hitting the top of kitchen
cabinets.
2. Open the lid and remove the bread pan.
To do this, simply grasp the handle of
the pan and pull straight up. Use a gentle,
non-abrasive soap and wash, rinse and
dry the pan thoroughly.
3. Attach the kneading blade to the bread pan,
as shown. You will find the kneading blade
in a small plastic wrap attached to the
power cord.
4. Set the bread pan aside. Do not yet
place the pan into the breadmaker.
Important
After a baking cycle, the
bread machine will not
operate until it has cooled
down.
Important
The breadmaker has an
automatic "keep warm"
setting that will keep your
bread warm for up to.one hour. To turn warmer off,
press the "StartfStop" button and hold until you hear
a beep.
Important
Do NOT press the "Start/Stop" button while the
breadmaker is making bread. This will cause
the machine will turn off and you will need to start
over again, from scratch.
Caution:
The breadmaker is very hot. Do not handle the machine
while it is operating. Do NOT lift the lid while the
breadmaker is baking bread.