Page 1
Operating Instructions 14" LCD TV with DVD Player Region / Region discs only TELETEXT 14LD Before operating the unit, please read this manual thoroughly.
Page 2
WARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture. MAINS SUPPLY This unit is designed to operate from AC 240V 50Hz household mains supply. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
• TELETEXT Function • On-Screen Programming • Picture Control Adjustments • Auto Power Shut Off • On Screen 5 Language Display • Sleep Timer • Programmable ON/OFF Timer DVD Player • Digital Audio Jack (Coaxial) • Multi-Language • Multi-Angle CONTENTS PREPARATION PRECAUTIONS ...
PRECAUTIONS Under certain conditions, such as low humidity or walking across wool carpet, you may experience a static discharge when touching the unit. If this happens and it fails to function, follow the procedure below. Un-plug the unit from the AC socket. It may take two to three hours for the static build up to clear.
POWER button VOLUME UP/DOWN buttons Front Remote sensor Standby Handle Headphones socket AUDIO (L/R)/VIDEO IN (AV IN 3) sockets LOCATION OF CONTROLS CHANNEL UP/DOWN buttons indicator Left Side Right Side DISC slot PLAY 1 button STOP 3 button SKIP 7/6 buttons EJECT 5 button...
Page 6
LOCATION OF CONTROLS Rear Cable holder DC input socket SCART input socket Variable TV-screen angle Approx. 15˚ COAXIAL DIGITAL AUDIO RF IN socket OUT socket AUDIO (L/R)/VIDEO IN (AV IN 2) sockets 0˚ Approx. 5˚ You can adjust the angle of the TV-screen for 5˚...
REMOTE CONTROL Power on/off DISPLAY Display TV or DVD operation status TV/DVD Select to operate TV or DVD (EJECT) Ejects the disc Direct channel selection of TV Input setting Enter a security code VOL +/– Volume Up/Down MUTE Mute 0/AV Scart Input or AV input SLEEP Sleep timer...
Page 8
REMOTE CONTROL INSERTING BATTERY Open the battery compart- ment cover in the direction of the arrow. OPERATION • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a dis- tance of Approx.
TO USE AC POWER 1. Connect the AC mains lead to the AC adaptor. 2. Connect the AC adaptor plug into this unit’s DC input socket. 3. Connect the AC mains lead into an AC socket. 4. The Standby indicator will light. NOTES: •...
ANTENNA CONNECTIONS Connect an indoor or outdoor antenna to the antenna socket at the rear panel as shown below. For all antenna circuit problems, please consult your local dealer. Antenna socket EXTERNAL ANTENNA The type of antenna required depends on the position of your home, its distance from the transmitter and local interference.
CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the User Guide provided with each component for the location of video and audio inputs and outputs.
Page 12
CONNECTION TO OTHER EQUIPMENT Input Selection If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the 0/AV button. Press the TV/DVD button to select TV mode and then press the 0/AV button repeatedly to select AV1, AV2 or AV3.
This unit has 5 different languages for MENU set up which can be selected through the ON Screen Display: English, German, French, Italian or Spanish. NOTE: If you are using this unit for the first time, step 1 and 2 of the MENU screen will not be shown.
PRESETTING THE CHANNELS Once you have connected up this unit, you will need to tune in the channels in order to watch TV stations. There are two ways that you can do this: NOTES: • If you want to skip any channels, refer to page 16.
Page 15
PRESETTING THE CHANNELS MANUAL TUNING How to tune a station to channel 10 position. Press MENU. Press to select the CH TUNING mode, then press ENTER. Press to select the MANUAL mode, then press ENTER. Press to select PAL or SECAM-L.
Page 16
PRESETTING THE CHANNELS (CONTINUED) TO CHANGE THE CHANNELS EXAMPLE: Changing of channel position from CH2 and CH5. Press MENU. Press to select the CH TUNING mode, then press ENTER. Press to select the CH ALLOCATION mode, then press ENTER. Press to select the channel position No.
Once you have correctly connected and set up the channels on your set, you can view the channels as follows. NOTE: The on screen display will disappear after 4 seconds. Automatic Power Shut Off If a station being viewed stops broadcasting for about 15 minutes, the unit will automatically shut itself off and go into standby mode.
CONVENIENT FUNCTIONS The following functions are available from the remote control handset only. TV/AV Selection For receiving the desired signal: Press AV to select the TV or AV mode. +0 # TV position - to view a AV position - to receive through the direct Video in- normal TV programme.
The on timer feature allows you to automatically turn on your TV after a preset amount of time (up to 12 hours and 59 minutes) on the selected channel. The off timer also allows you to turn off your TV after a preset amount of time. You can set the off timer in conjunction with the on timer.
PICTURE ADJUSTMENTS The picture settings have been adjusted at the factory under optimum signal reception conditions. However, you can adjust for BRIGHTNESS, CONTRAST, COLOUR and SHARP- NESS to your preference. NOTES: • The picture settings can only be adjusted when they are displayed on screen. •...
BASS, TREBLE AND BALANCE Press MENU. Press to select AUDIO. Then press ENTER. Press to adjust the BASS. If BASS has not appeared, press repeatedly until BASS appears. The adjusting screen will disappear about one minute after finishing an adjustment. Each time you press , the sound adjustment screen changes as shown below.
AV COLOUR ADJUSTING/NICAM STEREO SOUND AV COLOR ADJUSTING When connecting external equipment to the unit, the picture may become black and white. This can be corrected by selecting AV (Extension) Colour as follows. Press MENU. Press ▲ or ▼ to select the AV COLOUR mode.
RECEPTION OF INTERFERENCE The most common types of television interference are as follows. IGNITION Black spots and horizontal streaks may appear, the picture may flutter or drift. This is usually caused by interference from car ignition system, neon lamps, electric drills or other electrical appliances.
TELETEXT Most broadcasting stations offer a Teletext service in addition to their standard TV program. Teletext offers news, weather forecast, winning Lotto numbers, TV listings and other interesting news. The text is received page by page, as soon as you select the broadcasting station. A single page can be displayed on the screen.
Page 25
To call a teletext page Leaf through the pages with the PAGE (M M M M M /? ? ? ? ? ) - button (forward or backward). Note: You will not necessarily find a page for every page number you enter.
DISC DVD discs must be Region 4 or Region ALL type to play on this unit. The loaded Disc (DVD, Audio-CD and MP3/JPEG-CD) will be recognized automatically. The suitable disc formats are: DVD-Video, CD, CD-R/RW and DVD-R/RW (Video format only). Some CD-R/RW discs may be incompatible.
PREPARATION/STATUS DISPLAY OF DISC The following pages describe the setup/operation in DVD mode. NOTE: If the unit does not operate properly: Static electricity can adversely affect the operation of this player. Sometimes this can be remedied by unplugging the unit for a short time, then reconnecting it.
SETTING SETUP LANGUAGE You can change the default settings to customize performance to your preference. NOTES: • If the selected soundtrack language is not recorded on the disc, the original language will be heard. • If the selected subtitle language is not recorded on the disc, the first-priority language is selected.
NOTES: • If a non-compatible disc is loaded, “Incor- rect Disc”, “Region Code Error” or “Paren- tal Error” will appear on the TV screen ac- cording to the type of loaded disc. If these appear, check your disc again (see pages 24 and 40).
SPECIAL PLAYBACK NOTE: There may be a slight delay be- tween when you press the button and the function activating. NOTE: The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an ex- tended period of time, you risk permanent...
This player can play back the MP3/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/JPEG-data, you need a Win- dows-PC with CD-R/RW drive and a MP3/JPEG- encoding Software (not supplied). The Apple-HFS-System cannot be played. MP3/JPEG CD information Limitations on MP3/JPEG CD playback •...
MP3/JPEG PLAYBACK About file menu Operation Elapsed time Media type File number Folder /0-9/Enter/Play Mode/ DVD Menu : Indicates MP3 file : Indicates JPEG file NOTES: • The picture menu is displayed when the FUJICOLOR CD or the Kodak Picture CD are played.
You can continuously play back all JPEG files automatically. SETTING THE JPEG INTERVAL Press SETUP in the stop mode. Press to select “Picture”, then press ENTER. Press to select “JPEG Interval”. Press to select your desired time. Off: Plays back one file at a time. 5 Seconds: Plays back images in the form of a slide show at 5 second intervals.
SETTING THE SELECT FILES When playing back a CD containing a mix- ture of MP3 and JPEG files, only MP3 or JPEG files can be displayed on the file menu. Press SETUP in the stop mode. Language Picture Press to select “Picture”, then press ENTER.
ZOOMING/LOCATING DESIRED SCENE NOTES: • You can select the Pause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
REPEAT PLAYBACK NOTES: • Some discs may not work with the repeat operation. • In A-B repeat mode, subtitles near point A or B may not appear. • During the A-B Repeat Playback the ANGLE feature will not operate. • You may not be able to set A-B Re- peat, depending on the scenes of the DVD.
The unit stores the points that you want to watch again. You can resume playback from that scene. NOTES: • Some discs may not work with the marking operation. • The marking is cancelled when you eject the disc or turn the power off. •...
CHANGING SOUNDTRACK LANGUAGE/SUBTITLES NOTES: • If the desired language is not heard af- ter pressing the AUDIO button several times, the language is not recorded on the disc. • Changing soundtrack language is can- celled when you eject the disc. The initial default language or available language will be heard if the disc is played back again.
CHANGING ANGLES/TITLE SELECTION/DVD MENU NOTES: • Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD. • Depending on the DVD, you may not be able to select the title. Depending on the DVD, a “title menu”...
SETTING THE ASPECT RATIO OF TV SCREEN/SETTING ON SCREEN DISPLAY NOTE: It is not always possible for the DVD disc to display the picture as per your preferred picture setting - for example, if you select “4:3 Panscan”, the disc may not offer this option.
DRC (Dynamic Range Control) ena- bles you to control the dynamic range so as to achieve a suitable sound for your equipment. NOTES: • This function works only during play- back of Dolby Digital recorded discs. • The level of Dynamic Range Reduction may differ depending on DVD video disc.
PARENTAL CONTROL SETTING Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. NOTES: • If each setup (P.26,31,32,38~41,43~45) has been completed, the unit can always be worked under the same con- ditions (especially with DVD discs).
TO CHANGE THE PARENTAL LEVEL NOTE: Do not forget the password. If you forget the password, you can reset the code as follow: Press and hold the Stop button on the front panel, then press and hold the number 7 button on the remote control at the same time.
TEMPORARY DISABLING OF RATING LEVEL BY DVD DISC Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. NOTE: This temporary cancellation of rating level will be kept until the disc is ejected.
You can select the language of the disc menu messages of DVDs. SETTING MENU LANGUAGE Press SETUP in the stop mode. Language Picture Press to select “Lan- guage”. Press or ENTER. Language Picture Then press to select “Menu”. Press or ENTER. Language Picture Press to select your...
SETTING SUBTITLE LANGUAGE The same subtitle language can always be selected even if you replace the disc or turn the power off. NOTE: If the selected language is not recorded on the disc, the first priority language is selected. Press SETUP in the stop mode. Language Picture Press to select “Lan-...
SETTING AUDIO SOUNDTRACK LANGUAGE The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. NOTE: If the selected language is not recorded on the disc, the original language will be heard.
LANGUAGE CODE LIST Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see pages 43~45). Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji Afar 1111 Finnish Afrikaans 1116 French Albanian 2927 Frisian Amharic...
If your unit does not work properly check the following before calling a service engineer. SYMPTOMS POWER The Mains lead is not connected. No power. POWER button is OFF. TV BROADCAST RECEPTION The Mains lead is disconnected. Antenna connector is not connected or wires are broken.
SPECIFICATIONS GENERAL Power supply: AC 240V 50Hz Power consumption: Operation : 50W Stand by : 3W 5.5 kg (12.1 lbs) Weight: Width : 476 mm Dimensions: Height : 357.5 mm Depth : 182 mm Operating temperature: 5°C - 40°C Operating humidity: Less than 80% TELEVISION Type:...
Page 52
ORION ELECTRIC CO., LTD. (JAPAN) 04/10 K...
Page 53
Quick Set-up Sheet for 14LD Antenna and Power Connections How to install the batteries Use battery type UM-4 (AAA-Size). Open the cover in direction of the arrow and take it off. Connect as follows. AC adaptor (supplied) Install the batteries as shown below, pay attention to polarities.
Page 54
Unit turning on Unit turning on Gerät einschalten POWER (ON/OFF) button On-screen language selection Make sure that the AC mains lead and AC adaptor plug are connected correctly. (See the previous page.) Press (Power) on the top of the unit or remote control. The STANDBY ( indicator will go off.
Channel preset Automatic tuning Press TV/DVD to select TV mode. Press MENU. Press to select CH TUNING. Then press ENTER. Press to select AUTO. Then press ENTER. The auto search starts and all channels are stored automatically, in the order that they are found. As this may not necessarily be the correct order, you can change the sequence of the channels (see page 13 or 14 of the main instruction book).
Page 56
Setting Setup language for DVD Playback J5N70307A Press TV/DVD to select DVD mode. Press SETUP in the stop mode. Press “Other”, then press to select “OSD Language”, then press or ENTER. Press to select desired language, then press ENTER. Press SETUP until normal TV screen appears.