Changing The Filter Bag; Replacing Micro Filter; Troubleshooting; Maintenance - Oreck XL BB870-AW User Manual

Maintenance

CHANGING THE FILTER BAG

A. Use only genuine
ORECK XL filter bags.
Stand unit on its back. Twist
knob counterclockwise to
release and lift out front
plate. B.
B
C. Remove used bag and
insert fresh bag. The
cardboard rim fits smoothly
into the recessed top.
Replace the front plate and
close unit by turning knob clockwise.
THE WHITE BAG GASKET GLUED
IN THE HOUSING MUST BE IN
PLACE OR UNIT WILL NOT
White Gasket
OPERATE PROPERLY. REPLACE IF
NEEDED.

REPLACING MICRO FILTER

Stand unit on its back.
Twist knob and lift out front plate.
Remove disposable bag.
Remove old filter from bottom
inside unit.
Replace with new filter.
A replacement filter is supplied in
each package of 12 ORECK XL
filter bags or you may order filters
separately.
E N G
A
C
Micro Filter
L I S H
M
aintenance and
C
ustomer
Your ORECK COMPACT CANISTER VACUUM is a product of
precise engineering. The motor bearings are permanently
lubricated and should not be oiled. If you require additional
information or have problems with your ORECK appliance, you
may call ORECK customer service at:
In USA
In Canada
Please specify the model number and serial/code number which
can be found on the data plate on the back of the vacuum.
Save your sales or purchase slip. Should your ORECK appliance
require warranty service in the U.S.A., present this slip to the
Authorized Service Center as your proof of purchase date, or, in
Canada, call customer service.
T
roubleshooting
Problem Possible Source Areas to Check
Cleaner Will 1. Not plugged
Not Run in properly
2. No electricity
in wall outlet.
3. Motor protector 3. See Motor
tripped.
4. Needs
service.
Vacuum Will 1. Filter bag is
Not Pick Up full.
Or Has Low
Suction
2. Hose/wand
tool is clogged.
3. Air leak due
to missing or
damaged
gasket.
Tools/Wands 1. Proper friction
Will Not Stay fit not being
Together obtained.
ALL OTHER SERVICING SHOULD BE DONE BY AN
ORECK AUTHORIZED SERVICE CENTER.
5
S
ervice
1 800 989-3535
- -
1-888-676-7325
unauthorized Oreck
G
uide
1. Be sure cleaner
is firmly plugged
into wall outlet.
2. Check electrical
source–fuse or
circuit breaker.
Protection System
page 2.
4. Take to service
center or call
for nearest
service center.
1. Replace filter
bag. See "To
Replace Filter
Bag," page 5.
2. Remove
obstructions.
3. Replace gasket.
See page 5.
1. Push and turn.