Stubborn Stains; Carpet Pile Rejuvenation; Hard Floor Cleaning; Attaching An Accessory - Oreck STEAM-IT STEAM100 User Manual

All purpose steam wand
Table of Contents

Advertisement

Operation
E
N

Stubborn Stains

For removing stubborn stains or
embedded grime on hard surfaces,
fold and attach the cloth leaving the
brushes underneath the powerhead
visible.
Move the brush sliders so that the
brushes appear underneath the power-
head. Move the brushes backwards
and forwards over the selected area.
NOTE: Do not use the brushes for routine carpet and hard floor cleaning
as unnecessary scrubbing may cause damage. The brushes should only be
used for removing stubborn stains and grime.

Carpet Pile Rejuvenation

To rejuvenate flattened carpet pile,
remove the cloth and connect the car-
pet glide base to the powerhead with
the steam comb section in place.
IMPORTANT! The housing and
accessories become hot during
operation.Allow the steam cleaner
to cool down before changing the
accessories. Never open the water
tank cap while the steam switch is on.

Hard Floor Cleaning

Reduce the steam flow to a lower setting by turning the steam control
regulator. Use both forward and backward strokes across the floor area.
NOTE: When the cloth becomes very wet, let cool, ring out the
moisture, use the reverse side or replace with a clean, dry cloth.

Attaching an Accessory

Accessories can be used on the main body of the steam cleaner by remov-
ing the powerhead and then attaching the desired accessory.
1. Press the lock button to remove the powerhead when cool.
2. Attach the desired accessory by aligning the hole in the side of the
accessory with the lock button on the main body of the steam cleaner.
Ensure the lock button clicks firmly into place.
G
L
I
S
H
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Steam-it

Table of Contents