Recording From A Connected Audio Source - Optimus CTR-108 Owner's Manual

14-1115.fm Page 9 Friday, January 8, 1999 10:31 AM
Note: If the external microphone
has a separate, smaller plug for
remote operation, insert that plug
into the jack. Then you can
REM
use the microphone's
switch to stop or start recording.
3. Press
RECORD
ing. Both
PLAY
down.
Note: To temporarily stop record-
ing, press
PAUSE
again to resume recording.
4. Speak into the external micro-
phone.
5. Press
STOP/EJECT
ing.
Recording from a Connected
Audio Source
You can record directly from an exter-
nal audio source, such as a radio, tape
deck, or CD player. To make the con-
nection, you need a suitable mono
patch cord with a 1
able from your local RadioShack
store).
Note: Before you connect an external
audio source to the recorder, be sure
the source's and the recorder's volume
controls are set to their minimum set-
tings.
Follow these steps to record from an
external audio source.
remote
to begin record-
and lock
RECORD
. Press
PAUSE
to stop record-
/ -inch plug (avail-
8
Note: If you connected an external mi-
crophone, disconnect it.
1. Load a blank cassette tape, or one
you want to record over, into the
cassette compartment.
2. Connect the external source to the
jack.
AUX
DC IN 6V
AUX REM
EAR MIC
3. Start the external audio source
and set its volume control to a nor-
mal listening level.
4. Press to begin record-
RECORD
ing. Both and
PLAY
down.
Note: To temporarily stop record-
ing, press
PAUSE
recording, press
PAUSE
5. Press
STOP/EJECT
ing. Then stop the audio source.
Note: During recording, the speaker is
muted. If you want to monitor the re-
cording, use the supplied earphone.
VOLUME
External
source
lock
RECORD
. To resume
again.
to stop record-
9