One for All URC-7540 User Manual & Code Book page 8

The Keypad
Key Function
_
Number Keys
The Number keys (0-9, 10, 20) provide
functions just like your original remote, such
as direct access programme selection. If your
-/--
original remote uses one/two digit input
switching (-/-- symbol), this function can be
obtained by pressing the -/-- key, which is the
same as the 10 key. If your original remote
has an AV, key this function can also be
found under the 20 key.
Video Recorder Keys
After pressing the VCR key, the Video
Recorder keys operate the functions of your
Video Recorder. To prevent accidental
recording, the Record key must be pressed
twice to start recording.
Teletext Keys
(on)
After pressing the TV key, the top row of
the VCR keys are used to operate the main
(off)
teletext functions. The symbols below the
keys are for teletext. The text keys are used
(expand)
to access the teletext functions of your
Television. Of course, your Television must be
(hold)
teletext capable. For an explanation of the
teletext symbols, please refer to page 23 of this
manual. For a detailed explanation on how
teletext works, please refer to the manual
of your Television set.
After pressing the TV key, the bottom row
(red)
of the Video Recorder keys marked red,
green, yellow and blue, allow you to access
the fastext functions of your television.
(green)
Again, your television must be fastext
capable to operate these functions. For a
more detailed explanation of teletext and
(yellow)
fastext, please refer to the manual of your
television set.
(blue)
6