Selecting The User Id; Using The User Id - Omron HEM-780 Instruction Manual

Automatic blood pressure monitor with comfit cuff
Hide thumbs Also See for HEM-780:
Table of Contents

Advertisement

Available languages

Available languages

3. Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate
appear on the display.

SELECTING THE USER ID

Select your USER ID. Always use the same USER ID when taking a
measurement. The monitor stores the measurement values in the
memory by the USER ID selected. These measurement values are
used to calculate the Morning Averages and Evening Averages.
Slide the USER ID Selection Switch up or down to select USER A or B.

USING THE USER ID

When you select a USER ID the monitor can be set to take one
measurement using the Single Mode or three consecutive
measurements using the TruRead
START/STOP button.
NOTE: The default value is set to the Single Mode to take
one measurement.
TM
The TruRead
monitor will inflate, take a measurement, and deflate three times
separated by a short interval of time between each measurement.
TAKING A MEASUREMENT
Mode takes three consecutive measurements. The
TM
Mode when you press the
27

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Intellisense hem-780

Table of Contents