Error Indicators And Troubleshooting Tips - Omron 10 SERIES PLUS BP791IT Instruction Manual

ERROR INDICATORS AND TROUBLESHOOTING TIPS

ERROR INDICATORS
SYMBOL
Air plug disconnected.
Arm cuff not applied correctly.
Air is leaking from the arm cuff.
Cuff over or under inflated.
The arm cuff was inflated above 299
mmHg when inflating the cuff manually.
Movement during measurement.
Clothing is interfering with the
arm cuff.
Device error.
Sensor may be out of alignment.
Cuff is not applied correctly.
CAUSE
55
CORRECTION
Insert the plug securely. Refer to "Applying the
Arm Cuff".
Apply the arm cuff correctly. Refer to "Applying
the Arm Cuff".
Replace the cuff with the new one.
Repeat measurement. Remain still and do not talk
during measurement. Refer to "Taking a
Measurement".
If "E2" appears repeatedly, inflate the cuff manually
until it is 30 to 40 mmHg above your previous
measurement result. Refer to "Taking a Measurement".
Do not inflate the cuff above 299 mmHg. Refer to
"Taking a Measurement".
Repeat measurement. Remain still and do not talk
during measurement. Refer to "Taking a
Measurement".
Remove any clothing interfering with the arm cuff.
Refer to "Applying the Arm Cuff".
Contact Customer Service.
Contact Customer Service for repair information.
Refer to "Applying the Arm Cuff".