Utility Software; Function Overview; Basic Specifications - Omron Smart Process Control CJ-Series Brochure & Specs

Utility Software

Utility Software
Touch Panel Software
■ Face Plate Auto-Builder for NS
Simply specify the CSV tag file created using the CX-Process Tool to automatically create a project constructed with a Face Plate for Loop-control
CPU Units for use with OMRON's NS-series Programmable Terminals.

Function Overview

• Create windows for monitoring and tuning PID and other function blocks for up to 100 loops (NS System version 4 or higher).
• NS project files for monitoring multiple Loop-control CPU Units from a single NS-series PT can be generated from CX-Process projects for up to
32 multiple nodes.
• When a Segment Program 2 or 3 function block is used for program operation, the Detailed Setting Windows (Time Interval vs. Output Value
Setting Window, Wait Interval Setting Window) used for the parameter settings are also automatically generated.
• NS-Runtime is supported.

Basic Specifications

Item
Name
Model number
Applicable PLC products
Applicable PTs
System Computer
requirements
CPU
OS
Memory
Hard disk storage
Monitor
Basic functions
Example of Automatically Created Windows
Tag No.
Tag comment
Status display 1
(AUTO, MAN, CAS)
Alarm status
indicators
PV bar display
Alarm set
value display
MV indicator
MV bar display
Up/Down
buttons to change
MV
16
Face Plate Auto-Builder for NS
WS02-NSFC1-EV3
CJ-series Loop-control CPU Units
CS-series Loop Control Boards (unit version 1.0 or later)
CS-series Loop Control Units (unit version 2.0 or later)
CS1D Process-control CPU Units
NS-series NS12, NS10, and NS8 (PT version 2.0 or later), CX-Designer
IBM PC/AT or compatible
Celeron 400 MHz or better recommended
Microsoft Windows 98SE, NT4.0 (Service Pack 6a), 2000 (Service Pack 3 or later), or XP
Recommended: 32 Mbytes min.
Recommended: 200 Mbytes free space min.
Minimum: 640 × 480 dots
Number of generated loops:100 max., control windows and tuning windows
Applicable face plates: 2-position ON/OFF, 3-position ON/OFF, Basic PID, Advanced PID, Indication and
Number of loops in control windows: 6 loops per window for NS12, 4 loops per window for NS10/NS8
Realtime trend in tuning window: 1-second cycle
To Tuning Window
Status display 2
(PV error, MV error)
PV numerical value display
SP numerical value display/input
Unit display
CAS button/display
SP bar display
Up/Down buttons to change SP
AUTO button/display
MAN button/display
MV numerical value
display/input
Basic PID Block Screen
Specifications
Operation, Indicator, Segment Program 2 (includes the parameter setting windows),
Segment Program 3 (includes the parameter setting windows)
Alarm setting
Switch status
Realtime trend
display
Tuning Window
Write/read setting data
Time interval,
output value,
and unit for
each step
Setting confirmation
graph (horizontal axis
shows steps)
Segment program details setting window
Touch Panel Software
Parameter settings
To Control
Window
Function
Block Face
Plate