Samsung CS29Z45 Owner's Instructions Manual

COLOUR TELEVISION

CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 /
CS29Z58 / CS29A730 / CS29A760 /
CS29A750 / CS29B850 / CS29U50 / CS29U57
Owner's Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register

Control Panel

(depending on the model)
➢ The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Standby indicator
6 Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode.
 The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Connection Panel
(depending on the model)
The actual configuration of your TV may be different,
➢
depending on your model.
Rear Panel
VIDEO
OUT
Y
IN 2 P
B
P
IN 1
R
AV IN / OUT
VIDEO L - AUDIO - R
OUT
Y
IN 2
P
B
IN 1 P
R
☛ Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
English - 1
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
or
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment,
cable television
such as a VCR, DVD, decoder, satellite receiver, video
network
game device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a
DVD with component output.
Connecting to the HDMI Input
The HDMI6 connectors is used for equipment with HDMI
output, such as a Set-Top Box, DVD player, AV receiver or
digital TV.
or
No additional Audio connection is needed for an HDMI to
➢
HDMI connection.
cable television
Front (or Side) Panel
network
☛ Please be sure to match the colour coded input terminals
and cable jacks.
or
cable television
network
1 Video input
2 Audio input
AA68-04050A-00
AA68-04050A