or
cable television
network
FM
or
FM ANT
cable television
network
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
☛
Please be sure to match the color coded input terminals and
cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω coaxial
socket). To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network. If you are using
an indoor aerial, you may need to adjust it when tuning your
television until you obtain a picture that is both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA34 connectors are used for equipment, such as a VCR,
DVD, decoder, satellite receiver, video game device, or video
disc player. (When using the mono equipment, connect to the
AUDIO-L of 3 input connector.) The RCA5 connectors are used
for equipment such as a DVD with component output. (480i/576i)
➢
You can press TOOLS button to enter DUAL I-II to choose
Mono or Stereo.
Connecting to the FM signal Input
The 6 is used for FM listening,Connect to the FM radio antenna.
➢
Do not connect RCA Video to FM ANT terminal
continued...
AA68-04052F-01
12:00:10