Establishing Music Port In The I8G And E6G Confgurator Software - Nuvo Music Port NV-MP Installation Manual

Figure 2: –Music Port Hardware Connections
III. Establishing Music Port in the I8G and E6G Configurator Software (Fig. 3)
The I8G and E6G Configurator Software is an optional setup tool for establishing
sources and zone control of the Grand Concerto and Essentia E6G Audio Distribution
Systems. The Source tab within the software allows each of the six available source
inputs to be established.
To establish desired inputs within the I8G and E6G Configurator, within the "Source"
tab of the Configurator, double click on an available source input 1-6. This will open a
"Source Select" window. There, you can establish a name for the Music Port sources
within the "Display Name" window (Note that unless you check the box "Always Use
Display Name (ignore name sent by NuVoNet Device)", the Music Port will
automatically place a name in the Source menu. Create a three-character abbreviation
for each of the Music Port sources in the "Short Name" window. Scroll to NuVo as a
manufacturer and select NV-MP and double click. Repeat these steps for each of the
Music Port sources being established.
POWER
NuVoNet Address
4 6
1 2 3 5
NuVoNet Source Address
5
SIR 3:09 PM
SR 86 (P101)
Sirius Pops
Jozef Kossovit
Hungaria
MENU
OK
VARIABLE
OUTPUT
RS-232
TIP=L
RING=R
FIXED
OUTPUT
ZONE 7&8 PROGRAM USE CNLY WITH 250V FUSE
SYS ON
MODEL NV-I8DM
CONNECT TO CONNECT TO SIX SOURCE EIGHT ZONE
NV-I8EZP1 NV-I8X AUDIO DISTRIBUTION SYSTEM
120V 60Hz 500W FUSE:T5 A
USE NV-NC1 USE NV-SLC1 NuVo Technologies Cincinnati Ohio USA
www.nuvotechnologies.com
CABLE CABLE
CONFORMS TO
EXT. MUTE R
UL STD.6500
C US CERTIFIED TO
SYSTEM NETWORK DIGITAL LINK CAN/CSA STD.E60065
3033118