Nortel Passport 8672ATME Using Manual
  1. Manuals
  2. Brands
  3. Nortel Manuals
  4. Accessories
  5. Passport 8672ATME
  6. Using manual
Nortel Passport 8672ATME Using Manual

Nortel Passport 8672ATME Using Manual

Nortel networks passport module user guide
Hide thumbs Also See for Passport 8672ATME:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Using the Passport 8672ATME
Module
Part No. 209195-B
October 2001
4401 Great America Parkway
Santa Clara, CA 95054

Advertisement

Table of Contents
loading

Related Manuals for Nortel Passport 8672ATME

Summary of Contents for Nortel Passport 8672ATME

  • Page 1 Using the Passport 8672ATME Module Part No. 209195-B October 2001 4401 Great America Parkway Santa Clara, CA 95054...

  • Page 2: Statement Of Conditions

    In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
  • Page 3 Canadian Department of Communications Radio Interference Regulations This digital apparatus (Passport 8000 Series switch) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
  • Page 4 30 days of purchase to obtain a credit for the full purchase price. “Software” is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies.
  • Page 5 (for DoD entities). Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer fails to comply with the terms and conditions of this license. In either event, upon termination, Customer must either return the Software to Nortel Networks or certify its destruction.
  • Page 6 209195-B...

  • Page 7: Table Of Contents

    Chapter 1 About the Passport 8672ATME Module ......25 Features ............26 ATM ELANs, and Ethernet VLANs .
  • Page 8 Safety and environmental precautions ........37 Installing the Passport 8672ATME Module ....... . . 39 Verifying installation .
  • Page 9 Chapter 5 Managing the Passport 8672ATME Module with the CLI........... 75 Configuration commands .
  • Page 10 Chapter 6 Configuring the Passport 8672ATME Module ..... . 117 Initial configuration ........... 117 Changing the clock setting using Device Manager .
  • Page 11 Index ............157 Contents Using the Passport 8672ATME Module...
  • Page 12 Contents 209195-B...
  • Page 13 Extending the inserter/extractor levers ......39 Figure 7 Inserting the Passport 8672ATME Module ......40 Figure 8 Closing the inserter/extractor levers .
  • Page 14 Figures Figure 30 show ports info atm all command output ......86 Figure 31 show ports info atm fdb command output ......89 Figure 32 show ports info atm ports command output .
  • Page 15 Port page ..........151 Figures Using the Passport 8672ATME Module...
  • Page 16 Figures 209195-B...
  • Page 17 Tables Table 1 Passport 8672ATME Module online LED indications ....31 Table 2 MDA LED indications ........31 Table 3 Device Manager port color codes .
  • Page 18 Port page items ......... . . 151 Table 57 Factory default settings for the Passport 8672ATME Module ..155 209195-B .

  • Page 19: Preface

    • Understanding of the transmission and management protocols used on your network • Experience with windowing systems or graphical user interfaces (GUIs) ® 8672ATME Module is part of the Nortel Networks Passport line of Using the Passport 8672ATME Module...

  • Page 20: Text Conventions

    Preface Text conventions This guide uses the following text conventions: angle brackets (< >) bold Courier text braces ({}) brackets ([ ]) ellipsis points (. . . ) 209195-B Indicate that you choose the text to enter based on the description inside the brackets.

  • Page 21: Related Publications

    ( > ) vertical line ( Related publications For more information about using a Passport 8000 Series switch, the resident CLI, or Device Manager, refer to the following publications: • Release Notes for the Passport 8000 Series Switch Release 3.2 (part number...
  • Page 22 Preface • Installing and Maintaining the Passport 8003 Chassis and Components (part number 313074-B Rev 00) Provides instructions for installing the Passport 8003 Chassis in an equipment rack and for installing and replacing fan trays, power supplies, modules, gigabit interface converters, and media dependent adapters. This guide describes some of the routine tasks of operating the Passport 8003 Chassis and includes technical specifications for the chassis and the modules.
  • Page 23 VLANs, MultiLink Trunking, OSPF, RIP, and IPX. • Network Design Guidelines for the Passport 8000 Series Switch (part number 313197-B Rev 00) Provides guidelines for using the switching and routing features of the Passport 8000 Series hardware and software in your network design.

  • Page 24: How To Get Help

    You can purchase selected documentation sets, CDs, and technical publications through the Internet at the How to get help If you purchased a service contract for your Nortel Networks product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance.

  • Page 25: About The Passport 8672Atme Module

    Passport 8600 Routing Switch. (For more information on ATM, refer to the ATM Forum Web site at the http://www.atmforum.com URL.) The Passport 8672ATME Module occupies a single slot in a Passport 8600 series chassis. The module is a baseboard with room for two of the following optional Media dependent adapters (MDAs): •...

  • Page 26: Features

    Chapter 1 About the Passport 8672ATME Module You can use up to two Passport 8672ATME Modules in one Passport 8600 series chassis. Refer to Networking Concepts for the Passport 8000 Series Switch for a thorough discussion of the complete functionality of the Passport 8000 series product line, including the Passport 8672ATME Module.

  • Page 27: Atm Elans, And Ethernet Vlans

    If you delete a VLAN, you delete 1483 ELANs associated with the VLAN. Virtual network router Virtual network router (VNR) refers to the routing functions between two ATM virtual/emulated networks. You can use the Passport 8672ATME Module as an IP- and IPX-optimized VNR. Traffic shaping The Passport 8672ATME Module provides per channel traffic shaping and supports unspecified bit rate (UBR) and variable bit rate (VBR).

  • Page 28: Rfc 1483 Support

    PVCs between Centillion ATM virtual ports (VPorts) and other clients based on LLC encapsulation. The current Centillion platform only supports bridged variations of RFC 1483. The Passport 8672ATME Module supports the following types of RFC 1483 ELANs: •...

  • Page 29: Media Dependent Adapters

    Figure 1 Passport 8672ATM module To configure and manage the Passport 8672ATME Module, connect to the console port of your switch fabric module (either the Passport 8690SF Module or the Passport 8691SF Module). For information on connecting to the console port, refer to the installation guide that came with your switch.

  • Page 30: Online Led

    Figure 4 Passport 8672 ATM module with OC-12c/STM-4 MDA Online LED The front panel of the Passport 8672ATME Module has an Online LED that indicates whether or not the module has power applied and is initialized correctly. When the Passport 8672ATME Module is first inserted into the chassis, the Online LED turns amber until the board is recognized by the system and passes a power-on self-test.

  • Page 31: Mda Leds

    Table 1 lists the Passport 8672ATME Module online LED indications. Passport 8672ATME Module Table 1 Online LED State Card is not receiving power. Amber Card is initializing or downloading. Amber Card is offline. Green Card is online. MDA LEDs Table 2 lists the MDA LED indications.

  • Page 32: Console And Diag Ports

    Console port of either module, refer to Getting Started with the Passport 8000 Series Switch Management Software. The Diag port on the Passport 8672ATME Module is used only by Nortel Networks personnel for debugging purposes. You can see diagnostic messages but you cannot input any text.

  • Page 33: Passport 8672Atme Module Terminology

    ATM uses dedicated media connections running in parallel, allowing simultaneous multiple connections through a single switch device at very high speeds. • PVC: Permanent virtual circuit. Dedicated connection between devices that is manually set up. acronyms,” next Using the Passport 8672ATME Module...
  • Page 34 Chapter 2 Passport 8672ATME Module terminology • SVC: Switched virtual circuit. On-demand connection between an ATM or frame relay source and destination that lasts for the duration of the transmission. • VC: Virtual circuit. This is a network service that provides connection-oriented service regardless of the underlying network structure.

  • Page 35: Sonet Terms And Acronyms

    STS-12c/STM-4 frame structures at 622 Mb/s. Concatenation refers to the fact that there is only one logical data stream (rather than supporting a channelized structure). Chapter 2 Passport 8672ATME Module terminology Using the Passport 8672ATME Module...

  • Page 36: Sonet Transmission Rates

    Chapter 2 Passport 8672ATME Module terminology SONET transmission rates The following transmission rates are commonly used with SONET: • OC-3c/STM-1: 155.52 Mb/s (and SDH/STM-1) • OC-12c/STM-4: 622.08 Mb/s (and SDH/STM-4) The SONET specification defines optical both as: • Single-mode fiber (SMF) •...

  • Page 37: Installing The Passport 8672Atme Module

    Chapter 3 Installing the Passport 8672ATME Module This chapter describes the procedure for installing the Passport 8672ATME Module. It covers the following topics: • “Safety and environmental • “Installing the Passport 8672ATME Module” on page 39 • “Verifying installation” on page 41 •...
  • Page 38 Chapter 3 Installing the Passport 8672ATME Module • When handling modules, do not touch components on the modules; always handle modules by their edges. Store unused modules in their protective packaging. Warning: Fiber optic equipment can emit laser or infrared light that can injure your eyes.

  • Page 39: Installing The Passport 8672Atme Module

    Note: Always handle an I/O module by the sides and carefully slide it out of the chassis. Place the module on a grounded work surface and in an antistatic bag for storage. Chapter 3 Installing the Passport 8672ATME Module (Figure 9059FA...

  • Page 40: Figure 7 Inserting The Passport 8672Atme Module

    Chapter 3 Installing the Passport 8672ATME Module Handling the Passport 8672ATME Module by the sides only, carefully align it with the card guides in the chassis. Slide the module into the slot until the module connectors touch the chassis backplane...

  • Page 41: Verifying Installation

    Tighten the retaining screws Figure 9 Tightening the retainer screws You must install at least one MDA on the Passport 8672ATME Module in order to pass traffic. For instructions on installing MDAs, refer to Installing Media Dependent Adapters for the Passport 8672ATME Module.

  • Page 42: Initialization

    Chapter 3 Installing the Passport 8672ATME Module Initialization When the Passport 8672ATME Module is installed into a Passport 8600 series chassis, ensure that the switch fabric module (either the Passport 8690SF or Passport 8691SF module) in the same chassis has a PCMCIA card inserted and that the PCMCIA card contains the p80t3200.dld image, which supports the...

  • Page 43: Figure 10 Unsuccessful Download Screen Output

    Chapter 3 Installing the Passport 8672ATME Module Figure 10 Unsuccessful download screen output Copyright (c) 1998-2001 Nortel Networks, Inc. CPU Slot 6: PPC 740 Map B Version: 1.0.0.2/3 Creation Time: Jun 29 2000, 23:24:35 Hardware Time: AUG 09 2000, 14:02:57 UTC...

  • Page 44: Mda Insertion And Configuration

    Chapter 3 Installing the Passport 8672ATME Module After the image loads onto the Passport 8672ATME Module, it performs a series of self-diagnostic tests. If the module fails the diagnostics, the screen displays the following message: Fatal bring up error on ATM card in slot <number>.

  • Page 45: Replacing A Module

    To verify that the Passport 8672ATME Module is ready to receive and transmit traffic, check the LEDs on the module and the MDA. Once you enable the ports using the CLI or Device Manager, the online LED on the module lights steady green, and the module is ready.

  • Page 46: Starting The System After A Module Replacement

    Chapter 3 Installing the Passport 8672ATME Module Starting the system after a module replacement After you a replace a module on the chassis, you can expect the following results: • In a running system, when you replace an I/O module with a module of the same type, the system restores the configuration of all the ports.

  • Page 47: Managing The Passport 8672Atme Module With Device Manager

    Web-based management features. Port numbering You must install an MDA into the Passport 8672ATME Module in order to have connectivity. The module contains two slots for MDAs, and you can mix and match among the following MDAs, which are available in both SMF and MMF: •...

  • Page 48: Device Manager

    5 to 8 apply to the MDA in the right slot regardless of the actual physical number of ports. For example, a Passport 8672ATME Module in the third slot of the Passport 8600 series chassis with an OC-12c/STM-4 MDA in the left slot and an OC-3c/STM-1...

  • Page 49: Device Manager Access And Passwords

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager For detailed information on all aspects of installing and running Device Manager, refer to: • Getting Started with the Passport 8000 Series Switch Management Software • Configuring Switching and Routing Operations for the Passport 8000 Series Switch Using Device Manager Release 5.x.x...

  • Page 50: Figure 11 Passport 8000 Series Chassis With Passport 8672Atme Module

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 11 Passport 8000 series chassis with Passport 8672ATME Module The ports on the graphical image are color-coded to provide at-a-glance port status. Table 3 Table 3 Device Manager port color codes...

  • Page 51: Configuring And Managing Atm

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Additionally, many Device Manager windows and dialog boxes contain buttons. Table 4 describes the function of these buttons. Table 4 Device Manager buttons Field Apply Refresh Close Help Insert Resize Columns Note: You must always click Apply at the bottom of the tab to implement any changes you make.

  • Page 52: Changing Default Settings

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Changing default settings To change the default settings on the Passport 8000 Series switch or to perform any configuration tasks in Device Manager: On the device view, double-click on the port you want to configure.

  • Page 53: Table 5 Atm Interface Tab Fields

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 5 describes the Interface tab fields. Table 5 ATM Interface tab fields Item Description Index Unique value assigned to each interface. The value ranges between 16 and 255. Name Displays the name of this port.

  • Page 54: Resetting The Module

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 5 ATM Interface tab fields (continued) Item UnknownMacDiscard DirectBroadcastEnable Action Result Resetting the module To reset the module: Highlight the module. From the Device Manager menu bar, choose Edit > Card.

  • Page 55: Figure 13 Card Tab

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 13 Card tab Table 6 describes the Card tab fields. Table 6 Card tab fields Field Description FrontType Card type. FrontDescription ATM. FrontAdminStatus Administrative status of the card. FrontOperStatus Operational status of the card.

  • Page 56: Viewing Mda Information

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 6 Card tab fields (continued) Field BackHWVersion BackPartNumer BackDateCode BackDeviations Click the ATM tab. The ATM tab opens Figure 14 ATM tab Click reset. Click Apply. Viewing MDA information To view information on the MDA you are using, Highlight the MDA.

  • Page 57: Enabling Or Disabling A Port

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 15 MDA dialog box Table 7 describes the MDA dialog box fields. Table 7 MDA dialog box fields Field Description Type Media type: • rc<XXXX>Oc3BaseSM. • rc<XXXX>Oc3BaseMM. • rc<XXXX>Oc12BaseSM.

  • Page 58: Editing Port Parameters

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Click Apply. To enable or disable a port using a shortcut menu: Right-click on the port. A shortcut menu opens. Choose Enable or Disable. Editing port parameters To view or change the general parameters of the port: On the device view, highlight a port.

  • Page 59: Figure 16 Atm Tab

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 16 ATM tab Table 8 describes the ATM tab fields. Table 8 ATM tab fields Item Description ifIndex Interface Index. MediaType mmf (multimode fiber) or smf (single-mode fiber) LineSpeed For OC-3c, the operating speed is 155.52 Mb/s;...

  • Page 60: Editing Circuit Parameters

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 8 ATM tab fields (continued) Item FramingMode ClockSource LoopBackMode MacAddress Editing circuit parameters To view and configure ATM PVC parameters: On the device view, highlight a port. From the Device Manager menu bar, choose Edit > Port.

  • Page 61: Figure 17 Atm Pvc Tab

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 17 ATM PVC tab Table 9 describes the ATM PVC tab fields. Table 9 ATM PVC tab fields Item Description Virtual path identifier. Virtual circuit identifier. PvcId Internal index ID of the PVC.

  • Page 62: Figure 18 Insert Atm Pvc Dialog Box

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Click Insert. The Insert ATM PVC dialog box opens Figure 18 Insert ATM PVC dialog box Table 10 describes the Port, Insert ATM PVC dialog box fields. Table 10 Insert ATM PVC dialog box fields...

  • Page 63: Deleting A Pvc

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager In the Vpi field, type the VPI-bit size. In the Vci field, type the VCI-bit size. Note: For <vpi.vci>, 0.0 is not supported. In the Name field, type the name of the ATM PVC.

  • Page 64: Configuring Atm 1483 Elan Parameters

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 19 ATM PVC tab with a PVC selected Click Delete. The PVC is deleted. Configuring ATM 1483 ELAN parameters To view and configure ATM 1483 ELAN parameters for the port: On the device view, highlight a port.

  • Page 65: Table 11 Atm 1483 Elan Tab Fields

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 11 describes the ATM 1483 ELA Table 11 ATM 1483 ELAN tab fields Field Description VlanId VLAN to which the ELAN belongs. ElanId Internal ID of the ELAN. NumPvcIds Number of PVCs pairs used in the ELAN.

  • Page 66: Figure 21 Port, Insert Atm 1483 Elan Dialog Box

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 21 Port, Insert ATM 1483 ELAN dialog box Table 12 describes the Insert ATM 1483 ELAN dialog box fields. Table 12 Port, Insert ATM 1483 ELAN dialog box fields...
  • Page 67 Chapter 4 Managing the Passport 8672ATME Module with Device Manager In the VlanId field, type the VLAN ID. In the PvcIds field, type the PVC ID. Note: For <vpi.vci>, 0.0 is not supported. In the ConnectType field, select the type of routing protocol: bridged, ip, or ipx.

  • Page 68: Figure 22 Insert Atm 1483 Elan Dialog Box For Ip Routing

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 22 Insert ATM 1483 ELAN dialog box for IP routing 10 If Ipx is selected in the ConnectType field, complete the following fields: In the IpxVlanEncapMethod, select the encapsulation method (llc, snap, ether-ii, or raw).

  • Page 69: Deleting An Atm 1483 Elan

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 23 Insert ATM 1483 ELAN dialog box for IPX routing Deleting an ATM 1483 ELAN To delete an ATM 1483 ELAN: On the device view, highlight a port. From the Device Manager menu bar, choose Edit > Port.

  • Page 70: Configuring Atm F5-Oam End-To-End Loopback

    The ATM 1483 ELAN is deleted. Configuring ATM F5-OAM End-to-End Loopback A Passport 8672ATME Module, by default, replies to ATM F5-OAM Loopback requests received. However, the transmission of F5-OAM Loopback requests and the processing of F5-OAM Loopback replies received require enabling this feature on a PVC by PVC basis.

  • Page 71: Figure 25 Atm Pvc Dialog Box-Atm Pvc Tab

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Figure 25 ATM PVC dialog box—ATM PVC tab Highlight a PVC. Click F5 Loopback. The F5 Loopback dialog box opens with the F5 Loopback tab displayed (Figure 26). Figure 26 F5 Loopback dialog box Table 13 describes the F5 Loopback tab fields.

  • Page 72: Displaying F5 Loopback Statistics

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 13 F5 Loopback tab field descriptions (continued) Field LbUpCount LbDownCount TrapEnable Displaying F5 Loopback statistics To display F5 Loopback statistics: From the Device Manager menu bar choose Edit > ATM.

  • Page 73: Displaying Statistics Using Device Manager

    Chapter 4 Managing the Passport 8672ATME Module with Device Manager Table 14 describes the fields in the F5 Loopback Stats tab. Table 14 F5 Loopback Stats tab fields Field VcStatus LbRequestSent LbReplyReceive LbReplySent Displaying statistics using Device Manager Statistics are not supported in Device Manager in this release. See the stats atmport command”...
  • Page 74 Chapter 4 Managing the Passport 8672ATME Module with Device Manager 209195-B...

  • Page 75: Managing The Passport 8672Atme Module

    Chapter 5 Managing the Passport 8672ATME Module with the CLI You can manage your Passport 8672ATME Module through the command line interface (CLI). You can also use the embedded Web-based management feature to monitor the 8672ATME Module. Refer to Chapter 4, “Managing the Passport 8672ATME Module with Device Manager”...

  • Page 76: Configuration Commands

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Configuration commands This section describes the CLI configuration commands available with the Passport 8672ATME Module. There are three types of configuration commands: • “Module • “1483 ELAN statistics” on page 77 •...

  • Page 77: 1483 Elan Statistics

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 15 config atmcard command parameters and variables Parameters and variables card-reset elan-stats <enable|disable> info 1483 ELAN statistics The 1483 ELAN statistics commands allow you to collect ELAN statistics for an ATM port.

  • Page 78: Show Atm Elan-Stats

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show atm elan-stats <vlan id> Use this command to display the ELAN statistics for a particular VLAN ID. If the collection of ELAN statistics is disabled, a message is printed before the ELAN statistics.

  • Page 79: Clear Atm Elan-Stats

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 16 Information fields for the show atm elan-stats command (continued) Field InDiscards OutDiscards InUcastPkts OutUcastPkts InMcastPkts OutMcastPkts InBcastPkts OutBcastPkts clear atm elan-stats Use this command to clear the ELAN statistics for a particular VLAN ID. The syntax is: clear atm elan-stats <...

  • Page 80: Config Atm Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI config atm command Table 17 describes the parameters and variables for the config atm < ports > command. Table 17 config atm command parameters and variables Parameters and variables action <action choice>...

  • Page 81: Config Atm Pvc Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 17 config atm command parameters and variables (continued) Parameters and variables state <enable | disable> info config atm pvc command Table 18 describes the parameters and variables for the config atm pvc command.

  • Page 82: Config Atm Pvc 1483 Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 18 config atm pvc command parameters and variables (continued) delete <vpi.vci> info [<ports>] config atm pvc 1483 command Use the config atm pvc 1483 commands to configure 1483 parameters on the Passport 8672ATME Module.

  • Page 83: Table 20 Config Atm Pvc 1483 Ip Command Parameters And Variables

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 19 config atm pvc 1483 bridged command parameters and variables (continued) remove <vid> <vpi.vci> [,<vpi.vci>]... info Table 20 describes the parameters and variables for the config atm pvc 1483 ip command.

  • Page 84: Config Atm Info Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 21 config atm pvc 1483 ipx command parameters and variables Parameters and variables create <vid> <vpi.vci> <ipx> delete <vid> info config atm info command Figure 29 shows a sample of the output resulting from executing the command.

  • Page 85: Show Commands

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Show commands This section discusses the CLI show commands available with the Passport 8672ATME Module. These commands allow you to view information about the module: show ports info atm all [< ports >] show ports info atm fdb show ports info atm ports [<...

  • Page 86: Figure 30 Show Ports Info Atm All Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports info atm all Figure 30 Passport-8610:5/show/ports/info/atm# all ======================================================= ====================================================== PORT SCRAMBLE FRAMING MAX-BITS CLOCK DESCRIPION ENABLE --------------------------------------------------------------------- OC-12c MM enable Quad OC-3c MM enable Quad OC-3c MM enable...

  • Page 87: Table 22 Information Fields For The Show Ports Info Atm All Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 22 describes the information fields for the show ports info atm all command. Table 22 Information fields for the show ports info atm all command Field Description PORT NUM Port number.

  • Page 88: Show Ports Info Atm Fdb Command

    (FDB) for the 1483 bridged point to multi-point PVCs. The FDB stores the information that it learns in the Passport 8672ATME Module. In a point to multi-point connection, the Passport 8672ATME Module uses the FDB table to determine which PVC to use in the egress direction. The command...

  • Page 89: Show Ports Info Atm Ports Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports info atm fdb Figure 31 Passport-8610:5/show/ports/info/atm# fdb ============================================================= ============================================================= PORT VLAN MAC ADDRESS --------------------------------------------------------------------- 00.00.00.00.03 Table 23 describes the information fields for the show ports info atm fdb command.

  • Page 90: Figure 32 Show Ports Info Atm Ports Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 32 show ports info atm ports command output Passport-8610:5/show/ports/info/atm# ports ======================================================================= ======================================================================= PORT DESCRIPION ----------------------------------------------------------------------- OC-12c MM Quad OC-3c MM enable Quad OC-3c MM enable Quad OC-3c MM enable...

  • Page 91: Show Ports Info Atm Pvc Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 24 Information fields for the show ports info atm ports command (continued) Field MAX-BITS VCI CLOCK SOURCE LOOPBACK MODE ADMIN STATE STATUS show ports info atm pvc command This command displays information circuits (PVCs) for the specified port or for all ports.

  • Page 92: Figure 33 Show Ports Info Atm Pvc Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 33 show ports info atm pvc command output Passport-8610:5/show/ports/info/atm# pvc ==================================================================== ==================================================================== PORT VPI.VCI ENCAPS -------------------------------------------------------------------- 0.100 llc-snap 3.200 llc-snap 0.33 llc-snap 3.90 llc-snap 3.40 llc-snap 4.50 llc-snap 7.100...

  • Page 93: Show Ports Info Atm 1483 Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports info atm 1483 command This command displays information specified port or for all ports. The command uses the syntax: show ports info atm 1483 [< ports >] Figure 34 show ports info atm 1483 command output...

  • Page 94: Show Ports Stats Atmport Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 26 Information fields for the show ports info atm 1483 command (continued) Field VLAN MAC ADDRESS LOCAL IP ADDRESS REMOTE IP ADDRESS IPX NETWORK NUMBER IPX ENCAP show ports stats atmport command...

  • Page 95: Figure 35 Show Ports Stats Atmport [] Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 35 show ports stats atmport [<port num>] command output Passport-8606:6/show/ports/stats# atmport =========================================================================== =========================================================================== PORT CELLS CELLS --------------------------------------------------------------------------- 6744908 6744901 6744893 6744888 35314189 =========================================================================== =========================================================================== PORT IN DROP PKTS PKTS...

  • Page 96: Show Ports Stats Atm Felinecurrent

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 27 Information fields for the show ports stats atmport command (continued) Field OUT PKTS IN DROP PKTS OUT DROP PKTS UNKNOWN VPI/VCI CELLS Number of packets for which the vpi/vci values are...

  • Page 97: Figure 36 Show Ports Stats Atm Felinecurrent Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 36 show ports stats atm felinecurrent command output Passport-8610:5/show/ports/stats/atm# felinecurrent ====================================================================== ATM Far End Line Current Stats ====================================================================== PORT ERRORED SECONDS COUNT (ES) ---------------------------------------------------------------------- Passport-8610:5/show/ports/stats/atm# felinecurrent Table 28 describes the information fields for the...

  • Page 98: Show Ports Stats Atm Felineinterval

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports stats atm felineinterval This command displays statistics interval. You specify which interval, or span of intervals, to display for the command. The command uses the syntax: show ports stats atm felineinterval < intervalid >...

  • Page 99: Show Ports Stats Atm Fepathcurrent

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 29 Information fields for the show ports stats atm felineinterval command (continued) Field SEVERELY ERRORED COUNT (SES) CODE VIOLATION COUNT (CV-L) UNAVAILABLE SECONDS (UAS) INTERVAL ID show ports stats atm fepathcurrent This command displays current statistics at the receiving end.

  • Page 100: Show Ports Stats Atm Fepathinterval

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 30 describes the information fields for the show ports fepathcurrent Table 30 Information fields for the show ports stats atm fepathcurrent command Field PORT NUM ERRORED SECONDS COUNT (ES)

  • Page 101: Figure 39 Show Ports Stats Atm Fepathinterval Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 39 show ports stats atm fepathinterval command output Passport-8610:5/show/ports/stats/atm# fepathinterval 96 ========================================================================= ========================================================================= PORT ERRORED SECONDS COUNT (ES) ------------------------------------------------------------------------ INTERVAL ID = 96 Passport-8610:5/show/ports/stats/atm# fepathinterval 96 Table 31 describes the information fields for the show ports...

  • Page 102: Show Ports Stats Atm Linecurrent

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports stats atm linecurrent This command displays current statistics uses the syntax: show ports stats atm linecurrent [< ports >] Figure 40 show ports stats atm linecurrent command output...

  • Page 103: Show Ports Stats Atm Lineinterval

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 32 Information fields for the show ports stats atm linecurrent command (continued) Field SEVERELY ERRORED COUNT (SES) CODE VIOLATION COUNT (CV-P) UNAVAILABLE SECONDS (UAS) STATUS show ports stats atm lineinterval This command displays statistics interval.

  • Page 104: Show Ports Stats Atm Pathcurrent

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 33 describes the information fields for the show ports lineinterval Table 33 Information fields for The show ports stats atm lineinterval command Field PORT NUM ERRORED SECONDS COUNT (ES)

  • Page 105: Figure 42 Show Ports Stats Atm Pathcurrent Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 42 show ports stats atm pathcurrent command output Passport-8610:5/show/ports/stats/atm# pathcurrent ========================================================================= ========================================================================= PORT ERRED SECS SEVERELY ERRED CODE VIOLATION COUNT (ES) COUNT (SES) ------------------------------------------------------------------------- Passport-8610:5/show/ports/stats/atm# Table 34 describes the information fields for the show ports...

  • Page 106: Show Ports Stats Atm Pathinterval

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports stats atm pathinterval This command displays statistics You specify the interval or span of intervals to display. The command uses the syntax: show ports stats atm pathinterval < intervalid > [< ports >]...

  • Page 107: Show Ports Stats Atm Sectioncurrent

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 35 Information fields for the show ports stats atm pathinterval command (continued) Field SEVERELY ERRORED COUNT (SES) CODE VIOLATION COUNT (CV-P) UNAVAILABLE SECONDS (UAS) INTERVAL ID show ports stats atm sectioncurrent...

  • Page 108: Show Ports Stats Atm Sectioninterval

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 36 describes the information fields for the show ports sectioncurrent Table 36 Information fields for the show ports stats atm sectioncurrent command Field PORT NUM ERRORED SECONDS COUNT (ES)

  • Page 109: Figure 45 Show Ports Stats Atm Sectioninterval Command Output

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 45 show ports stats atm sectioninterval command output Passport-8610:5/show/ports/stats/atm# sectioninterval 96 =========================================================================== =========================================================================== PORT ERRORED SECONDS COUNT (ES) --------------------------------------------------------------------------- INTERVAL ID = 96 Passport-8610:5/show/ports/stats/atm# sectioninterval 96 Table 37 describes the information fields for the show ports...

  • Page 110: Show Ports Stats Atm Sonetmediumtbl

    Chapter 5 Managing the Passport 8672ATME Module with the CLI show ports stats atm sonetmediumtbl This command displays statistics command uses the syntax: show ports stats atm sonetmediumtbl Figure 46 show ports stats atm sonetmediumtbl command output Passport-8610:5/show/ports/stats/atm# sonetmediumtbl =========================================================================...

  • Page 111: Configuring Atm F5-Oam End-To-End Loopback

    LINE TYPE CIRCUIT ID Configuring ATM F5-OAM End-to-End Loopback A Passport 8672ATME Module, by default, replies to ATM F5-OAM Loopback requests received. However, the transmission of F5-OAM Loopback requests and the processing of F5-OAM Loopback replies received require enabling this feature on a PVC by PVC basis.

  • Page 112: Config Atm Pvc F5-Oam Command

    Chapter 5 Managing the Passport 8672ATME Module with the CLI config atm pvc f5-oam command This CLI command enables/disables and configures the F5-OAM Loopback feature for a virtual circuit (VC). When this command is used for disabling the F5-OAM Loopback on a VC, the configuration parameters are ignored. The command uses the syntax: config atm <slot/port>...

  • Page 113: Show Ports Info Atm Pvc [Slot/Port]

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 39 F5-OAM Loopback parameters (continued) Configuration Default down <value> 5 responses trap <value> disabled For example, to enable F5-OAM Loopback for VPI=0 & VCI=33 in port 6 of an...

  • Page 114: Show Ports Info Atm F5-Oam [Slot/Port]

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Figure 47 Sample output for the show ports info atm pvc [slot/port] command As shown in Furthermore, only one PVC (3/5 0.100) is using the default F5-OAM Loopback configuration. show ports info atm f5-oam [slot/port] show ports info atm f5-oam [slot/port] F5-OAM Loopback status and statistics for a particular PVC.

  • Page 115: Clear Atm F5-Oam [Slot/Port]

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Table 40 defines the status and statistics in the command. [slot/port] Table 40 Status and statistic definition F5 VC Status NOT MANAGED DOWN VERIFY DOWN UP VERIFY Loopback Req Sent...

  • Page 116: Displaying Packet Loss Counters

    Chapter 5 Managing the Passport 8672ATME Module with the CLI Displaying packet loss counters The CLI command counters. Table 41 Table 41 Sample output for the sh ports stats interface main command Passport 8600 #5: sh ports stats interface main...

  • Page 117: Configuring The Passport 8672Atme Module

    CPU for the chassis, and the other module is the standby CPU, taking over in case of failure. Note that the administrative and operational configurations of the Passport 8672ATME Module are not retained after failover. When a CPU failover occurs, all traffic on the chassis stops momentarily while the standby CPU re-initializes all input/output modules.

  • Page 118: Changing The Clock Setting Using Device Manager

    Chapter 6 Configuring the Passport 8672ATME Module Before you can pass traffic using the Passport 8672ATME Module with its installed MDA, you must change the clock setting. You can do this in one of two ways: • “Changing the clock setting using Device •...

  • Page 119: Changing The Clock Setting Using The Cli

    Chapter 6 Configuring the Passport 8672ATME Module Figure 49 ATM tab Table 8 on page 59 To set the clock setting, in the ClockSource section, click loopTimed or freeRunning. Click Apply. Changing the clock setting using the CLI To change the clock setting using the CLI, enter: config atm <...

  • Page 120: Basic Configuration Procedures

    1483 PVC bridged across an ATM PVC network. Use a separate ATM1483 PVC for each VLAN. The VLANs may appear on the same port or on different ports of the Passport 8672ATME Modules. You cannot bridge between PVCs in the same VLAN on the same port of the Passport 8672ATME Module.

  • Page 121: Creating A Vlan "Byport" And Adding Ports

    Creating a VLAN “byPort” and adding ports From the Device Manager menu bar, choose VLAN > VLANs. The VLAN dialog box opens with the Basic tab displayed Figure 51 Basic tab Chapter 6 Configuring the Passport 8672ATME Module ATM VC1 8672 ATM MDA 1...

  • Page 122: Table 42 Basic Tab Fields

    Chapter 6 Configuring the Passport 8672ATME Module Table 42 describes the Basic tab fields. Table 42 Basic tab fields Field Name ColorIdentifier Type StgId PortMembers ActiveMembers StaticMembers NotAllowtoJoin ProtocolId SubnetAddr SubnetMask Click Insert. The VLAN, Insert Basic dialog box opens...

  • Page 123: Figure 52 Vlan, Insert Basic Dialog Box

    Chapter 6 Configuring the Passport 8672ATME Module Figure 52 VLAN, Insert Basic dialog box Table 43 describes the VLAN, Insert Basic dialog box fields. Table 43 VLAN, Insert Basic dialog box fields Field Description Unique VLAN identifier. Name An administratively-assigned name for this VLAN.

  • Page 124: Figure 53 Vlanportmembers Dialog Box

    Chapter 6 Configuring the Passport 8672ATME Module Table 43 VLAN, Insert Basic dialog box fields (continued) Field PortMembers QoSLevel Do the following: In the Id field, enter the Id number for the VLAN (an integer between 0 and 4094). b In the Name field, enter the VLAN name.

  • Page 125: Configuring An Atm 1483 Pvc

    Chapter 6 Configuring the Passport 8672ATME Module Click OK. The VlanPortMembers dialog box closes and the VLAN, Insert Basic dialog is redisplayed. Click Close. Configuring an ATM 1483 PVC To configure an ATM 1483 PVC: From the Device Manager menu bar, choose Edit > ATM.

  • Page 126: Associating The Pvc With The Vlan

    Chapter 6 Configuring the Passport 8672ATME Module h If you select vbr in the Service type field, complete these fields: In the PeakCellRate field, enter the PCR (an integer between 86 and 733490). In the SustainedCellRate field, enter the SCR (an integer between 86 and 733490).

  • Page 127: Bridging Point-To-Point Traffic Using An Atm 1483 Pvc Using The Cli

    Click Close. Bridging point-to-point traffic using an ATM 1483 PVC using the CLI To configure the Passport 8672ATME Module for ATM 1483 PVCs for VLANs bridged across an ATM PVC network, using the CLI: To create a VLAN by port, enter:...

  • Page 128: Configuring Two Atm 1483 Pvcs On The Same Atm Port

    Associating the PVCs with the same VLAN Follow the procedures outlined in page 126 to associate both PVCs with the same VLAN. The Passport 8672ATME Module directs the two ATM 1483 bridged PVCs to two different ATM ports on the other end. 209195-B ATM Switches...

  • Page 129: Bridging Point-To-Multipoint Traffic Using An Atm 1483 Pvc Using The Cli

    To associate the two 1483 bridged PVCs with the same VLAN, enter: config atm 1/1 pvc 1483 bridged create 2 0.100, 0.101 The Passport 8672ATME Module directs the two ATM 1483 bridged PVCs to two different ATM ports on the other end. Configuring an IP routing 1483 PVC using Device Manager In the configuration shown in ATM 1483 PVC as the sole member of a VLAN configured for IP routing.

  • Page 130: Creating Two Vlans "Byport

    Figure 55 IP routing with ATM 1483 PVCs Passport Note: Each configured ATM 1483 PVC uses one VLAN. The Passport 8672ATME Module can be configured for a maximum of 256 VLANs per MDA and a maximum of 512 VLANs per card. This configuration requires the following procedures: •...

  • Page 131: Figure 56 Ip Address Tab

    Chapter 6 Configuring the Passport 8672ATME Module Click IP. The IP, VLAN dialog box opens with the IP Address tab displayed (Figure 56). Figure 56 IP Address tab Table 45 describes the IP Address tab fields. IP Address tab Table 45...

  • Page 132: Enabling Rip Routing

    Click Close. Enabling RIP routing Note: The Passport 8672ATME Module supports only RIP version 2. From the Device Manager menu bar, choose VLAN > VLANs. The VLAN dialog box opens with the Basic tab displayed Table 42 on page 122 Click one of the VLANs.

  • Page 133: Figure 58 Rip Tab

    Chapter 6 Configuring the Passport 8672ATME Module Click the RIP tab. The RIP tab opens (Figure Figure 58 RIP tab Table 47 describes the RIP tab fields. Table 47 RIP tab fields Field Description Enable IP address of the VLAN.

  • Page 134: Enabling Ospf Routing

    Chapter 6 Configuring the Passport 8672ATME Module Table 47 RIP tab fields (continued) Field AutoAggregateEnable AdvertiseWhenDown Click Enable. Click Apply. The IP Address tab is redisplayed. Click Close. Enabling OSPF routing If the routing protocol is OSPF, to enable OSPF routing: From the Device Manager menu bar, choose VLAN >...

  • Page 135: Figure 59 Ospf Tab

    Chapter 6 Configuring the Passport 8672ATME Module Figure 59 OSPF tab Table 48 describes the OSPF tab fields. Table 48 OSPF tab fields Field Description Enable Enables or disables OSPF routing on the specified interface HelloInterval Length of time, in seconds, between the Hello packets that the router sends on the interface.

  • Page 136: Configuring A Null-Encapsulation Pvc

    Follow the instructions there except, in the ConnectType field, select IP instead of bridged. Configuring an IP routing 1483 PVC using the CLI To configure the Passport 8672ATME Module for an ATM 1483 IP routed PVC, using the CLI: To create two VLANs by port, enter:...

  • Page 137: Configuring An Ipx Routing 1483 Pvc Using Device Manager

    Chapter 6 Configuring the Passport 8672ATME Module To add an ATM port (in this example, 1/1) and several Ethernet ports (in this example, 3/40 to 3/48) to the VLAN, enter: config vlan 2 port add 1/1 config vlan 3 port add 3/40-3/48 To configure IP addresses on both VLANs (use two different subnets), enter: config vlan 2 ip <...

  • Page 138: Creating Two Vlans "Byport

    Figure 60 IPX routing with ATM 1483 PVCs Passport Note: Each configured ATM 1483 PVC uses one VLAN. The Passport 8672ATME Module can be configured for a maximum of 256 VLANs per MDA and a maximum of 512 VLANs per card. This configuration requires the following procedures: •...

  • Page 139: Configuring Ipx Network Numbers

    Chapter 6 Configuring the Passport 8672ATME Module Configuring IPX network numbers To configure the IPX network numbers for both VLANs: From the Device Manager menu bar, choose VLAN > VLANs. The VLAN dialog box opens with the Basic tab displayed Table 42 on page 122 describes the VLAN Basic tab fields.

  • Page 140: Enabling Ipx Forwarding

    Chapter 6 Configuring the Passport 8672ATME Module Figure 62 IPX VLAN, Insert dialog box Table 50 Table 50 IPX VLAN, Insert dialog box fields Field NetAddr Encap In the NetAddr field, configure the IPX network numbers for the VLAN. In the Encap field, click the encapsulation type.

  • Page 141: Enabling Ipx Network Number Forwarding

    Chapter 6 Configuring the Passport 8672ATME Module Table 51 describes the Globals tab item. Table 51 Globals tab item Item Description RoutingEnable Enables routing. Click RoutingEnable. Click Apply. Click Close. Enabling IPX network number forwarding To enable forwarding for the IPX network number: From the Device Manager menu bar, choose IPX Routing >...

  • Page 142: Configuring A Null-Encapsulation Pvc

    Chapter 6 Configuring the Passport 8672ATME Module Table 52 Table 52 Circuits tab fields Field Index OperState Index VlanId NetNumber CompressedInitSent In the OperState field, enter “up” for all IPX network numbers created in this procedure. Click Apply. Click Close.

  • Page 143: Configuring An Ipx Routing 1483 Pvc Using The Cli

    Chapter 6 Configuring the Passport 8672ATME Module Configuring an IPX routing 1483 PVC using the CLI To configure the Passport 8672ATME Module for this setup using the CLI: To create two VLANs by port, enter: config vlan 2 create byport 1...
  • Page 144 Chapter 6 Configuring the Passport 8672ATME Module 209195-B...

  • Page 145: Web Management

    • Descriptions of the Web page layout Use the Web interface ATM folder to monitor the Passport 8672ATME Module parameters. When you access the Web interface, the System page is displayed. The ATM folder is in the navigation pane on the left of the system page (Figure 65).

  • Page 146: Figure 65 System Page

    LastVlanChange 209195-B Description Port type of this interface. This will be OC-3 SMF/ MMF or OC-12 SMF/MMF for a port on the Passport 8672ATME Module Value of system up time. Contact name. Port name. System location. Enables or disables traps.

  • Page 147: Figure 66 Atm Menu

    Value of sysUpTime at the time the last reboot occurred. Value of sysUpTime at the time the last reboot saved configuration changes. Default runtime configuration file name. Default configuration file name. Configuration file name. 67). Using the Passport 8672ATME Module...

  • Page 148: Figure 67 Pvc Page

    Chapter 7 Web Management Figure 67 PVC page Table 54 describes the fields displayed in the PVC page. Table 54 PVC page items Field Index Pvc Id Name Encapsulation Service Type Peak Cell Rate Sustained Cell Rate Max Burst Size 209195-B Description Unique value assigned to each interface.

  • Page 149: Figure 68 1483 Elan Page, (Left Section)

    Figure 68 1483 ELAN page, (left section) Figure 69 1483 ELAN page, (right section) Chapter 7 Web Management Figure 68 shows the left section of the page. To view Using the Passport 8672ATME Module Figure 69 shows...

  • Page 150: Table 55 1483 Elan

    Chapter 7 Web Management Table 55 describes the fields displayed in the 1483 ELAN page. 1483 ELAN Table 55 Field Index Elan Id Num Pvc Ids PvcIds Vlan Ids Connect Type Vlan Mac Address Dummy Mac Address Local Ip Address Remote Ip Address In Arp Send Enable In Arp Send Interval...

  • Page 151: Figure 70 Port Page

    This field is read only. It takes remaining bits from NumVpiBits. For example, if NumVpiBits is 3 for OC-3c, then NumVciBits is 8. Either SMF (single-mode fiber) or MMF (multi-mode fiber). Enables or disables scrambling. Using the Passport 8672ATME Module...
  • Page 152 155 MBS or 622 MBS Sets the loopback mode to: • • internal • external The MAC address assigned to this VLAN (used in IP and IPX routed circuits when there is no appropriate destination MAC to use). Passport 8672ATME...

  • Page 153: Technical Specifications

    Appendix A Technical Specifications This appendix lists the technical specifications for the Passport 8672ATME Module. Environmental specifications Operating temperature: Storage temperature: Operating humidity: Storage humidity: Operating altitude Storage altitude Free fall/drop: Vibration: Shock/bump: Physical specifications Height: Width: Depth: Weight (single module):...
  • Page 154 Appendix A Technical Specifications Safety agency approvals Electromagnetic emissions Meets requirements of: 209195-B UL Listed (UL 1950) CUL CSA 22.2 No. 950 IEC 950/EN 60950 CE mark CB Scheme Test Report and Certification NOM (NOM-019-SCFI-1994) US: FCC, CFR 47, Part 15, Subpart B, Class A Canada: ICES-003, Issue-2, Class A Australia/New Zealand: AS/NZS 3548:1995, Class A Japan: VCCI V-3/97.04, Class A...

  • Page 155: Factory Defaults

    Appendix B Factory defaults shows the default settings on the Passport 8672ATME Module as it comes Table 57 from the factory, as well as the management tool to change parameters. Table 57 Factory default settings for the Passport 8672ATME Module...
  • Page 156 Appendix B Factory defaults 209195-B...

  • Page 157: Index

    75 port commands 79 show commands 85 clock setting, changing 118, 119 clock source 152 clocking 60, 80 clock-source command 80 ClockSource field 60 command line interface (CLI) 75 config atm info command 84 Using the Passport 8672ATME Module...
  • Page 158 Index config atm pvc 1483 bridged command 82 config atm pvc 1483 command 82 config atm pvc 1483 ip command 82 config atm pvc 1483 ipx command 82 config atm pvc command 81 config atm pvc f5-oam command 112 configuration 44 basic procedures 120 initial tasks 29 Connect Type field 150...
  • Page 159 (MBS) 81 MBS (maximum burst size) 34 media dependent adapters (MDAs) description 29 dialog box 57 inserting 44 overview 25 port number 48 slot number 48 viewing information 56 Media Type field 151 Using the Passport 8672ATME Module Index...
  • Page 160 OperSpeed field 53 OperStatus field, port 53 OSPF routing, enabling 134 OSPF tab 134 packet loss counters 116 Passport 8000 series chassis 50 Passport 8600 Routing Switch 25 209195-B Passport 8672ATM Module configuration 48 hot-swapping 45 initialization 41 installing 39...
  • Page 161 Sustained Cell Rate field 148 SustainedCellRate field 61, 62 SVC (switched virtual circuit) 34 Synchronous Digital Hierarchy (SDH) 35, 60, 80 sysContact field 146 sysDescr field 146 sysLocation field 146 sysName field 146 System page 146 Using the Passport 8672ATME Module Index...
  • Page 162 Index sysUpTime field 146 technical publications 24 technical specifications 153 technical support 24 technology overview 33 testing 73, 80 text conventions 20 timing 60, 80 traffic shaping 27 transmission distance 36 transmission rates 36 TrapEnable field 72 troubleshooting displaying the image filename 77 downloading the image file 44 loop-back-mode 80 maximum cabling distances 36...

Table of Contents