Physical; Functional Description Of The Nt8D02 - Meridian Nortel 1 Option 11C Technical Reference Manual

Nortel networks network system technical reference guide
Hide thumbs Also See for Nortel Meridian 1 Option 11C:
Table of Contents

Advertisement

Page 366 of 544

Physical

Functional description of the NT8D02

553-3011-100
Standard 14.00
NT8D02 and NTDK16 Digital Line Cards
The NTDK16 is a 48 port card supported only in the Option 11C Mini. It is
based on the NT8D02 Digital Line Card, it is functionally equivalent to three
NT8D02s, and configured as cards 4, 5, and 6 in the main chassis. It uses A94
Digital Line Interface chips (DLIC) to provide the interface between the
Digital sets and the Option 11C Mini system.
In Option 11C Mini systems the NTDK16 Digital Line Card can only be
installed in slot 4 of the main chassis which is slotted to prevent accidental
insertion of other cards.
The digital line card circuitry is contained on a 320 mm (12.5 in.) by
254 mm (10 in.) printed circuit board (PCB). The NT8D02 is a double-sided
PCB, whereas the NTDK16 is 4 layers, but standard thickness. Both cards
connect to the backplane through a 120-pin or 160-pin edge connector.
The faceplate of the NTDK16BA digital line card is equipped with three light
emitting diodes (LEDs). A red LED lights when the card is disabled. At
power-up, this LED flashes as the digital line card runs a self-test. If the test
completes successfully, the card is automatically enabled (if it is configured
in software) and the LED goes out. This LED only shows the status of the
NTDK16 in slot 4.
Note: The NTDK16AA has one LED. This LED shows the status of
Card 4. The NTDK16BA has three LEDs. These LEDs show the status
of Cards 4, 5, and 6 configured on the NTDK16.
The digital line card is equipped with 16 identical units. Each unit provides a
multiplexed voice, data, and signaling path to and from digital apparatus over
a 2-wire full duplex 512 kHz time compression multiplexed (TCM) digital
link. Each digital telephone and associated data terminal is assigned a
separate terminal number (TN) in the system database, for a total of 32
addressable ports per card.
The digital line card contains a microprocessor that provides the following
functions:
self-identification
self-test
January 2002

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents