Nortel 1140E User Manual page 21

a. Confirm that the Bluetooth headset is still in search/pair mode.
On the GN Netcom GN 6210 headset the blue LED should still be
lighted when the pairing operation starts. If the headset timed out
and exited search/pairing mode, put the headset in pairing mode,
as discussed in step 5, and repeat step 9.
b. Check that you are using the correct PIN and repeat step 9.
11. Choose one of the following:
• If your headset is displayed in the Paired: combo box, proceed to
step 12.
• If more than one device is paired, you may need to navigate to the
one you want, as follows:
a. Press the
the Paired: combo box. Press the
mode.
b. Press the
Up/Down
headset.
c. Press the
Press the
Right
12. Press the
Set button (next to the Set Active Device item). Press the
key.
The message "Set active: "device name"" is displayed. This means
the headset named is now the active Bluetooth headset and is used
when you press the headset key.
Exit
13. Press the
main display. Changes are saved automatically.
Note 1: If the phone loses power, you must repeat the pairing
process from the beginning.
Note 2: If you pair more than one headset of the same model, they
have identical names in the Paired list.
Dual Pairing Headsets
Take special care when using a "dual pairing" type of Bluetooth headset.
The GN Netcom GN6210 is an example of such a headset. It can be
Right
navigation key to scroll in the list and highlight
Up/Down
navigation keys to open the list. Press the
navigations key to scroll in the list and highlight your
Enter
key to select the headset and close the list.
Enter
key to exit edit mode.
navigation key to scroll in the list and highlight the
soft key to close the Bluetooth menu and return to the
Configuring options
Enter
key to start the edit
Enter
soft
21