(Original instructions) DO NOT RETURN THIS PRODUCT TO THE STORE, d. Do not abuse the cord. Never use the cord for first contact your local STANLEY Office carrying, pulling or unplugging the power tool. Keep or nearest authorized service center.
ENGLISH (Original instructions) 4. Power tool use and care Additional Safety Instructions For Sanders a. Do not force the power tool. Use the correct power Sanding tool for your application. The correct power tool will do the job better and safer at the rate for which it was Lead Base Paint designed.
This information is printed on the nameplate. Lower voltage accessories. will cause loss of power and can result in over-heating. All STANLEY tools are factory-tested; if this tool does not • Injuries caused by prolonged use of a tool. When using operate, check the power supply.
If the power cord is replaced by an equally qualified person, but not authorized Adjusting the sanding belt tracking (FIG. E) by STANLEY, the warranty will not be valid. Turn the machine upside down (FIG. E), hold it firmly with Caracteristicas (FIG. A) one hand, start motor and release switch immediately after observing tracking of sanding belt.
The performance of your tool depends on the accessory • Where possible, clamp the workpiece to a work bench or used. STANLEY accessories are engineered to high quality similar sturdy surface. standards and designed to enhance the performance of your tool.
For more information about our Should you find one day that your STANLEY product needs authorized service centers and if you need technical advice, replacement, or if it is of no further use to you, do not repair, or genuine factory replacement parts, contact the dispose of it with household waste.
Page 11
Ebrahim Al Zayani, Opposite to Al Fouzan, Jeddah highway or King Abdul Aziz road, Yanbu. Tel: (966-4) 3960980, Fax: (966-4) 3961980. Mohamed Ahmed Bin Afif Est., P.O. Box 530, Yanbu, Al Bahr, Tel: (966-4) 3222626/ 3228867, Fax: (966-4) 3222210. SOUTH AFRICA: Stanley Black & Decker - RSA, 199 Winze Drive Stormill Ext 9 Roodepoort, Tel: (2711) 472 0454, Fax: (2711) 472 0482.