Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Issue 1 EN...
C o n t e n t s Contents 1. Introduction ... 5 Bluetooth wireless technology... 5 2. Get started ... 7 Overview ... 7 Chargers ... 7 Charge the battery... 8 Switch the headset on or off ... 9 Pair the headset...
I n t r o d u c t i o n 1. Introduction With the Nokia Bluetooth Headset BH-803 you can make and receive calls while on the move and use your mobile device hands free. You can use the headset with compatible devices that support Bluetooth wireless technology.
I n t r o d u c t i o n The headset is compliant with the Bluetooth Specification 2.0 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.
2. Get started ■ Overview The headset contains the following parts: • Earpiece (1) • Indicator light (2) • Charger connector (3) • Multifunction key (4) • Touch sensitive area for volume adjustment (5) • Earloop (6) • Microphone (7) Before you can start using the headset, you must charge the battery and pair the headset with a compatible device.
G e t s t a r t e d Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
The fully charged battery has power for up to 6 hours of talk time or up to 160 hours of standby time. However, the talk and standby times may vary when used with different compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the headset beeps at regular intervals, and the indicator light slowly flashes red.
Bluetooth devices. See the user guide of your device for instructions. 4. Select the headset (Nokia BH-803) from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your device. In some mobile devices, you may need to make the connection separately after pairing.
In your device, you may be able to allow the headset to connect to it automatically when the headset is switched on. To do this in Nokia devices, change your paired device settings in the Bluetooth menu. ■ Troubleshooting If you cannot connect the headset to your mobile device, do as follows: •...
B a s i c u s e To detach the earloop, gently pull it from the headset. ■ Call handling To make a call, use your mobile device in the normal way when the headset is connected to it. The blue indicator light flashes during the call. If your device supports last number redialing with the headset, press the multifunction key twice when no call is in progress.
B a s i c u s e To end a call, press the multifunction key, or use the keys of the mobile device. To put a call on hold (or unhold the call), press and hold the multifunction key. To answer a waiting call and put the current call on hold, press and hold the multifunction key.
B a s i c u s e ■ Switch the call between headset and mobile device To switch the call from the headset to a connected device, press and hold the multifunction key for about 4 seconds (the headset switches off), or use the keys of your device.
Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.