Table of Contents
Advertisement
OPERATOR SAFETY INSTRUCTIONS
WARNING
DANGER means:
WARNING means:
CAUTION means:
DANGER:
Failure to read the Owner's Manual prior to operating or attempting any service or mainte-
nance procedure to your American Sanders Technology machine could result in injury to
you or to other personnel; damage to the machine or to other property could occur as
well. You must have training in the operation of this machine before using it. If you
cannot read English, have this manual explained fully before attempting to operate
this machine.
DANGER:
Sanding/finishing wood floors can create an environment that can be explosive. The
following safety procedures must be adhered to:
• Cigarettes, cigars, pipes, lighters, pilot lights and any other source of ignition can create
an explosion when active during a sanding session. All sources of ignition should be
extinguished or removed entirely from the work area.
• Work areas that are poorly ventilated can create an explosive environment when certain
combustible materials are in the atmosphere, i.e., solvents, thinners, alcohol, fuels,
certain finishes, wood dust and other combustible materials. Floor sanding machines
can cause flammable material and vapors to burn. Read the manufacturer's label on all
chemicals used to determine combustibility. Keep the work area well ventilated.
• Spontaneous combustion or an explosion can occur when working with sanding dust.
The sanding dust can ignite and cause injury or damage. Sanding dust should be
disposed of properly. Always empty the sanding dust into a metal container that is
located outside of any building.
• Remove the contents of the dust bag when the bag is 1/3 full. Remove the contents of
the dust bag each time you finish using the machine. Never leave a dust bag unattended
with sanding dust in it.
• Do not empty the contents of the dust bag into a fire.
• Hitting a nail while sanding can cause sparks and create an explosion or fire. Always
countersink all nails before sanding floors.
DANGER:
Operating a machine that is not completely or fully assembled could result in injury or
property damage. Do not operate this machine until it is completely assembled. Keep
all fasteners tight. Keep adjustments according to machine specifications.
DANGER:
Electrocution could occur if the machine is used on a power circuit that repeatedly trips or is
undersized. Have a licensed electrician check the fuse, circuit breaker or power supply.
AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual
AVERTISSEMENT
Severe bodily injury or death can occur to you or other personnel if the
DANGER statements found on this machine or in this Owner's Manual are
ignored or are not adhered to. Read and observe all DANGER statements
found in this Owner's Manual and on your machine.
Injury can occur to you or to other personnel if the WARNING statements
found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all WARNING statements found in this Owner's
Manual and on your machine.
Damage can occur to the machine or to other property if the CAUTION state-
ments found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all CAUTION statements found in this Owner's
Manual and on your machine.
ADVERTENCIA
Page 3
Advertisement
Table of Contents
