Nextar X3-01 Important Safety Instructions Manual
  1. Manuals
  2. Brands
  3. Nextar Manuals
  4. Car Navigation system
  5. X3-01
  6. Important safety instructions manual

Nextar X3-01 Important Safety Instructions Manual

Nextar gps navigation system with mp3 player hardware manual
Hide thumbs Also See for X3-01:
Table of Contents

Advertisement

Quick Links

Download this manual
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the unit in the slot marked "DC 5V IN". Plug
the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty
inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time,
disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions. To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
Important Safety
Instructions
1

Advertisement

Table of Contents
loading

Related Manuals for Nextar X3-01

Summary of Contents for Nextar X3-01

  • Page 1: Important Safety Instructions

    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
  • Page 2 Important Safety Instructions NOTES Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Page 3 Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving.

  • Page 4: Features

    Features Navigation Function Navigation Function: The unit is designed to provide you with route suggestions. It supports voice navigation. Other Special Functions SD Card and USB Input: The unit is designed with SD card and USB ports and can be connected to SD card or other USB device for file loading.

  • Page 5: Accessories

    Accessories List ITEM NOTE Accessories and their part number are subject to modification without prior notice due to improvements. Accessories NAME Owner’s Manual AC Adaptor Car Adaptor USB Cable Windshield mount bracket Mount cradle Dashboard mount disk Pouch...

  • Page 6: Table Of Contents

    Contents Important Safety Instructions Features Accessories View of Main Unit System Connections Power Supply Preparation General Setup Playing Music Use of the Mount Accessories Troubleshooting Specifications ……………………………………….……..1 ……………………………………………...4 ……………………………………………...5 ……………………………………………...7 ……………………………………….……..8 …………………………..……….…...….10 ………………………………………..…..12 ………………………………………..…..16 ………………………………………...…18 ………………………………………..…..19 ………………………………………..…..20...

  • Page 7: View Of Main Unit

    LCD Screen POWER button Press to enter or exit the standby mode. Card Port Insert the SD card into the port. USB port View of Main Unit Headphone Jack DC 5V Input Jack Used to connect to the supplied car adapter.

  • Page 8: System Connections

    System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port that allows you to connect the unit to PC for map updating.
  • Page 9 System Connections Inserting SD Card The unit is designed with SD Card jack that allows you to insert the SD card into the unit as shown below: Connecting to Headphones Connect the headphones to the right side of the unit for private listening. When headphone is connected, the speakers will automatically turn off.

  • Page 10: Power Supply Preparation

    Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering the unit and charging the battery. Connect AC adaptor to the right side of the unit in the jack marked DC 5V IN, as shown on the right.

  • Page 11: Charging The Battery Pack

    About Rechargeable Battery Your portable GPS comes with a built-in rechargeable battery. Charge the battery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery delivers about 3 hours of use. Working conditions and precautions for the rechargeable battery New batteries should be fully charged before initial use.

  • Page 12: General Setup

    General Setup System Main Menu When in navigation mode, tap button in the Menu screen. A confirmation message appears asking if you want to exit the program now, as shown below. In the confirmation screen, tap Yes and the system main menu appears. In the system main menu, there are three items for selecting.
  • Page 13 General Setup LANGUAGE in the settings menu to enter LANGUAGE settings menu for language selecting, as shown below: Tap the buttons to select language. Then tap to confirm or tap cancel. BRIGHTNESS in the settings menu to enter BRIGHTNESS settings menu for brightness adjusting, as shown below: Tap the first group buttons to adjust the brightness level.
  • Page 14 General Setup DATE & TIME in the settings menu to enter DATE & TIME settings menu for changing to the current time zone, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date and tap the buttons of Time group to change the corresponding time.
  • Page 15 General Setup CALIBRATE in the settings menu to enter CALIBRATE menu for calibrating the sensitivity of the unit, the screen will display as below: Tap the center of “+” as it moves around the screen. If you touch the center of “+” every time, it will disappear and tap the screen to return to the settings menu.

  • Page 16: Playing Music

    Playing Music The unit is designed with SD card slot. You can insert the SD card with MP3 files. It only supports MP3 format files playback. Note: Do not store MP3 format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost.
  • Page 17 In the menu, tap the MENU button to enter the MP3 play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow In the play list, double tap the songs to start playback.

  • Page 18: Use Of The Mount Accessories

    Use of the Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: See Fig. 1. Push the mount cradle to mount bracket. See Fig.

  • Page 19: Troubleshooting

    Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so.

  • Page 20: Specifications

    Specifications TFT screen size 3.5 inches Frequency Response 20Hz～20kHz ≥65dB Audio Signal-to-noise Rate ≤－20dB (1kHz) Audio distortion or noise ≥70dB (1kHz) Channel Separation ≥80dB (1kHz) Dynamic Range AC 100-240V ～ Power 50/60Hz; DC 5V Power Consumption < 8W Dimensions 100mmX76mmX22mm (L*W*D) Weight About 0.25kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE...
  • Page 21 © 2008 Nextar (Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other brand names, trademarks and service marks are property of their owners. Nextar may find it necessary to modify, amend or otherwise change or update this manual.

Table of Contents