Disconnecting The Dishwasher - Whirlpool SERIES 400, SERIES 800, SERIES 806, SERIES 810, SERIES 840 Use And Care Manual

Disconnecting the dishwasher

1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment.
Converting a portable dishwasher
to a built-in
Your WHIRLPOOL
*
can be converted to a built-in (undercounter)
model by using conversion kit No. 4317856.
The kit is available at your Whirlpool dealer
or authorized Whirlpool service company.
Instructions are included with the kit.
C ON N E C T IN G A PO RTABL E DIS HW AS H ER
Portable Dishwasher
Locking collar
Hose connector
19