See figure {C} - Push locking mechanism to the right and push the cover of the battery compartment Congratulations on your purchase of a Stanley TLM 210. downwards and open it. Place the batteries in the The safety instructions can be compartment making sure they are correctly inserted.
11 Maximum value of continuous measurement next keystroke. 12 Stack recall OFF: Press and hold OFF - key {A, 5}. To maximize battery life the device will automatically turn off after 3 minutes of inactivity. Stanley TLM 210 1.0.0 gb Operation...
RING - key {A, 1} again. The measured distance is displayed. Pushing the CLEAR - key {A, 5} undoes the displayed immediately in the chosen unit. last step. Stanley TLM 210 1.0.0 gb Measuring...
{A, 4} until a beep, allows the user to take the and check if the selected result to carry on with calculations. symbol still appears. If so please call your dealer for assistance. Stanley TLM 210 1.0.0 gb Appendix...
* maximum deviation occurs under unfavourable conditions such as bright sunlight or when measuring to poorly From about 70 m, use target plate. reflecting or very rough surfaces. For distances over 30 m - Stanley TLM 210 1.0.0 gb Appendix...
Page 9
Warranty The Stanley TLM 210 comes with a two (2) year warranty from Stanley Works. For more information on the warranty please go to: www.stanleyworks.com. In case of any questions concerning the warranty please contact the dealer who you purchased the instrument from.