Nautilus EV7.16 Owner's Manual page 41

MAINTENANCE
The Nautilus Pro Series Elliptical requires a minimal amount of maintenance
®
and upkeep. For safety and long life of the machine, it is however important to
follow the guideline detailed below.

IMPORTANT
functioning properly. Contact your Nautilus
Daily Daily
Following each workout, use a clean, dry towel to completely wipe down the Following each workout, use a clean, dry towel to completely wipe down the
machine. Pay special attention to areas that tend to collect perspiration during machine. Pay special attention to areas that tend to collect perspiration during
use. Cleaning your machine regularly will help to prevent rust and corrosion. use. Cleaning your machine regularly will help to prevent rust and corrosion.
Weekly Weekly Weekly
Clean the machine thoroughly using a mild ammonia-based cleaner and a Clean the machine thoroughly using a mild ammonia-based cleaner and a Clean the machine thoroughly using a mild ammonia-based cleaner and a
clean cloth. Do not spray cleaner directly on to display panel or machine. clean cloth. Do not spray cleaner directly on to display panel or machine. clean cloth. Do not spray cleaner directly on to display panel or machine.
Instead, spray cleaner onto cloth. Use automotive touch-up paint to cover up Instead, spray cleaner onto cloth. Use automotive touch-up paint to cover up Instead, spray cleaner onto cloth. Use automotive touch-up paint to cover up
any scratches on the machine's painted surfaces. This will help to mitigate any scratches on the machine's painted surfaces. This will help to mitigate
possible rust areas. The power cord should also be inspected to make sure possible rust areas. The power cord should also be inspected to make sure
there is no damage. there is no damage.
Annually Annually
With regular use, it is advise that your Nautilus With regular use, it is advise that your Nautilus
and internally cleaned by an authorized Nautilus and internally cleaned by an authorized Nautilus
service technician should remove the machine's shrouds and inspect the drive service technician should remove the machine's shrouds and inspect the drive
belt, bearings and roller wheels for damage and wear. belt, bearings and roller wheels for damage and wear.
Do not operate machine if the unit is damaged or is not
Fitness Dealer to obtain service.
®
Elliptical Trainer be inspected Elliptical Trainer be inspected
® ®
service technician. The service technician. The
® ®
39