To Assemble Controls To Handle - Murray 20-inch Push Instruction Book

HOW TO ASSEMBLE THE CONTROLS TO THE HANDLE
Two types of handles are shown in Figure 4.
The engine on your model will determine
which type of handle is on your model. Type A
is for models with Briggs & Stratton engines.
Type B is for models with Tecumseh engines.
Note: On models with Briggs & Stratton en-
gines, make sure the stop lever bracket is
on the left side of the handle. On models
TYPE A
Models With
Briggs Engines
Handle
Engine
Stop Lever
Stop Lever
Bracket
Stop Cable
F-050401L
ASSEMBLY
Cable
Fastener
1101353
with Tecumseh engine, make sure the stop
lever bracket is on the right side of the han-
dle.
1. Mount the ends of the engine stop lever
into the top holes of the handle.
2. Attach the the stop cable to the handle as
shown in Figure 4.
Cable
Fastener
1101353
13
TYPE B
Models With
Tecumseh Engines
Handle
Stop Lever
Stop Lever
Bracket
Stop Cable
Engine
Figure 4