Sending A Fax - Multitech Multi-Tech FaxFinder FF120 Administrator User Manual

Sending a Fax

To send a fax by printing from an application program on a client PC, follow the steps listed below.
1. The FaxFinder client software must be installed on the PC. (See the section "Installing FaxFinder
Client Software" earlier in this manual.)
2. The client PC and the FaxFinder server must both be connected to the same Ethernet LAN system.
(See the section "Chapter 3, Part C: Configuring the FaxFinder Server" earlier in this manual.)
3. The association must be made between the client PC and the FaxFinder Server. (See the section
"Associating Client with Specific FaxFinder Unit(s)" earlier in this manual).
4. After installation, the FaxFinder Fax Client Software program will be running whenever the PC is
on. You can view the FaxFinder program's main window by clicking on the FaxFinder icon at the
lower right of the PC's monitor screen in its Application Tray. Then select "Show FaxFinder Client
Software."
Note : The user can shut down the FaxFinder program by selecting "exit" either
from the tray icon or from the main FaxFinder program screen. If the
program has been shut down, it can be restarted from the Windows Start
menu.)
However, you can send faxes through the FaxFinder without bringing up the FaxFinder Client
Software screen.
Multi-Tech Systems, Inc.
Chapter 5: FaxFinder Client Software Operation
FaxFinder Admin User Guide 80