Multitech Multi-Tech FaxFinder FF120 Administrator User Manual page 46

Field
Off-Hook Time
Width
Data Compression
Modem Port
Status
Elapsed time
Email Attachments
Connect Time
Height:
Error Correction:
FaxFinder timeline with "Elapsed Time" marked.
init time
Multi-Tech Systems, Inc.
Fax Details Screen Field Definitions
Values Description
mm/dd/yyyy The time at which the modem went off-hook for
hh:mm:ss the fax transmission.
numeric (in pixels) Width of fax. This is typically 1728 pixels.
mh, mr, mmr Data Compression reduces the fax data stream
taking advantage of the fact that most documents
have commonly-used runs of black and white
horizontally and the fact that most documents
differ very little from one scanned line to the next.
MH is a one-dimensional compression along the
horizontal axis. MR is a combination of one-
dimensional compression and compression of
differences between lines (two-dimensional
compression). Error Correction is not required if
MH or MR compression is used. MMR is two-
dimensional compression only and requires error
correction.
MH = modified Huffman, MR = modified READ,
MMR = modified modified READ
Default = MH.
1 – 8 (FF820) Indicates the modem on which the fax
1 – 4 (FF420) transmission occurred.
1 – 2 (FF220)
1 (FF120)
pass/fail Indicates whether the current fax has been
transmitted successfully or not.
(in seconds) Indicates the duration of the current fax
transmission.
numeric Indicates the number of email attachments into
which an incoming fax was divided.
mm/dd/yyyy Indicates the time at which the connection for the
hh:mm:ss current fax began.
Letter, Legal, Height of fax expressed in common page sizes
Variable (Letter = 8.5" x 11"; Legal = 8.5" x 14")
on, off Indicates whether the function to detect and right
faulty data is on or off.
off-hook time
connect time
FaxFinder Admin User Guide
Chapter 3: FaxFinder Server Software Screens
hang-up time
elapsed time
46